Anisotropic 3D full-waveform inversion of the Tommeliten Alpha field

TitleAnisotropic 3D full-waveform inversion of the Tommeliten Alpha field
Publication TypePresentation
Year of Publication2012
AuthorsMike Warner
KeywordsPresentation, SINBAD, SINBADFALL2012, SLIM

We have implemented a robust and practical scheme for anisotropic 3D acoustic full-waveform inversion. We demonstrate this scheme on a field data set, applying it to a four-component ocean-bottom survey over the Tommeliten Alpha field in the North Sea. This shallow-water data set provides good azimuthal coverage to offsets of 7 km, with reduced coverage to a maximum offset of about 11 km. The reservoir lies at the crest of a high-velocity antiformal chalk section, overlain by about 3000 m of clastics within which a low-velocity gas cloud produces a seismic obscured area. We inverted only the hydrophone data, and we retained free-surface multiples and ghosts within the field data. We invert in six narrow frequency bands, in the range 3 to 6.5 Hz. At each iteration, we selected only a subset of sources, using a different subset at each iteration; this strategy is more efficient than inverting all the data every iteration. Our starting velocity model was obtained using standard PSDM model building including anisotropic reflection tomography, and contained epsilon values as high as 20%. We have also attempted full-elastic inversion of these data to recover a shallow isotropic model of both p and s-wave velocities. The final FWI velocity model shows a network of shallow high-velocity channels that match similar features in the reflection data. Deeper in the section, the FWI velocity model reveals a sharper and more-intense low-velocity region associated with the gas cloud in which low-velocity fingers match the location of gas-filled faults visible in the reflection data. The resulting velocity model provides a better match to well logs, and better flattens common image gathers, than does the starting model. Reverse-time migration, using the FWI velocity model, provides significant uplift to the migrated image, simplifying the planform of the reservoir section at depth. The workflows, inversion strategy, and algorithms that we have used have broad application to invert a wide-range of analogous field data sets.

Citation Keywarner2012SINBADafw