@mastersthesis {oghenekohwo2017THetl,
	title = {Economic time-lapse seismic acquisition and imaging{\textendash}-Reaping the benefits of randomized sampling with distributed compressive sensing},
	year = {2017},
	note = {(PhD)},
	month = {08},
	school = {The University of British Columbia},
	type = {phd},
	address = {Vancouver},
	abstract = {This thesis presents a novel viewpoint on the implicit opportunities randomized surveys bring to time-lapse seismic - which is a proven surveillance tool for hydrocarbon reservoir monitoring. Time-lapse (4D) seismic combines acquisition and processing of at least two seismic datasets (or vintages) in order to extract information related to changes in a reservoir within a specified time interval. The current paradigm places stringent requirements on replicating the 4D surveys, which is an expensive task often requiring uneconomical dense sampling of seismic wavefields. To mitigate the challenges of dense sampling, several advances in seismic acquisition have been made in recent years including the use of multiple sources firing at near simultaneous random times, and the adaptation of Compressive Sensing (CS) principles to design practical acquisition engines that improve sampling efficiency for seismic data acquisition. However, little is known regarding the implications of these developments for time-lapse studies. By conducting multiple experiments modelling surveys adhering to the principles of CS for 4D seismic, I propose a model that demonstrates the feasibility of randomized acquisitions for time-lapse seismic. The proposed joint recovery model (JRM), which derives from distributed CS, exploits the common information in time-lapse data during recovery of dense wavefields from measured subsampled data, providing highly repeatable and high-fidelity vintages. I show that we obtain better vintages when randomized surveys are not replicated, in contrast to standard practice, paving the way for an opportunity to relax the rigorous requirement to replicate surveys precisely. We assert that the vintages obtained using our proposed model are of sufficient quality to serve as inputs to processes that extract time-lapse attributes from which subsurface changes are deduced. Additionally, I show that recovery with the JRM is robust with respect to errors due to differences between actual and recorded postplot information. Finally, I present an opportunity to adapt our model to problems related to time-lapse seismic imaging where the main finding is that we can better delineate time-lapse changes by adapting the joint recovery model to wave-equation based inversion methods.},
	keywords = {Acquisition, Compressive Sensing, distributed compressive sensing, joint recovery, PhD, thesis, time lapse},
	url = {https://slim.gatech.edu/Publications/Public/Thesis/2017/oghenekohwo2017THetl/oghenekohwo2017THetl.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Thesis/2017/oghenekohwo2017THetl/oghenekohwo2017THetl_pres.pdf},
	author = {Felix Oghenekohwo}
}
@mastersthesis {kumar2017THels,
	title = {Enabling large-scale seismic data acquisition, processing and waveform-inversion via rank-minimization},
	year = {2017},
	note = {(PhD)},
	month = {08},
	school = {The University of British Columbia},
	type = {phd},
	address = {Vancouver},
	abstract = {In this thesis, I adapt ideas from the field of compressed sensing to mitigate the computational and memory bottleneck of seismic processing workflows such as missing-trace interpolation, source separation and wave-equation based inversion for large-scale 3- and 5-D seismic data. For interpolation and source separation using rank-minimization, I propose three main ingredients, namely a rank-revealing transform domain, a subsampling scheme that increases the rank in the transform domain, and a practical large-scale data-consistent rank-minimization framework, which avoids the need for expensive computation of singular value decompositions. We also devise a wave-equation based factorization approach that removes computational bottlenecks and provides access to the kinematics and amplitudes of full-subsurface offset extended images via actions of full extended image volumes on probing vectors, which I use to perform the amplitude-versus- angle analyses and automatic wave-equation migration velocity analyses on complex geological environments. After a brief overview of matrix completion techniques in Chapter 1, we propose a singular value decomposition (SVD)-free factorization based rank-minimization approach for large-scale matrix completion problems. Then, I extend this framework to deal with large-scale seismic data interpolation problems, where I show that the standard approach of partitioning the seismic data into windows is not required, which use the fact that events tend to become linear in these windows, while exploiting the low-rank structure of seismic data. Carefully selected synthetic and realistic seismic data examples validate the efficacy of the interpolation framework. Next, I extend the SVD-free rank-minimization approach to remove the seismic cross-talk in simultaneous source acquisition. Experimental results verify that source separation using the SVD-free rank-minimization approaches are comparable to the sparsity-promotion based techniques; however, separation via rank-minimization is significantly faster and memory efficient. We further introduce a matrix-vector formulation to form full-subsurface extended image volumes, which removes the storage and computational bottleneck found in the convention methods. I demonstrate that the proposed matrix-vector formulation is used to form different image gathers with which amplitude-versus-angle and wave-equation migration velocity analyses is performed, without requiring prior information on the geologic dips. Finally, I conclude the thesis by outlining potential future research directions and extensions of the thesis work.},
	keywords = {Acquisition, extended image volumes, migration velocity analysis, PhD, Processing, rank minimization, waveform inversion},
	url = {https://slim.gatech.edu/Publications/Public/Thesis/2017/kumar2017THels/kumar2017THels.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Thesis/2017/kumar2017THels/kumar2017THels_pres.pdf},
	author = {Rajiv Kumar}
}
@mastersthesis {miao2014THesi,
	title = {Efficient seismic imaging with spectral projector and joint sparsity},
	year = {2014},
	note = {(MSc)},
	month = {03},
	school = {The University of British Columbia},
	type = {masters},
	address = {Vancouver},
	abstract = {In this thesis, we investigate the potential of improving the eciency of seismic imaging with two advanced techniques: the spectral projector and the {\textquoteright}joint sparsity{\textquoteright}. The spectral projector offers an eigenvalue decomposition free computation routine that can filter out unstable evanescent wave com- ponents during wave equation based depth extrapolation. {\textquoteright}Joint sparsity{\textquoteright} aims to improve on the pure sparsity promoting recovery by making use of additional structure information of the signal. Besides, a new sparsity optimization algorithm - PQNL1 - is proposed to improve both theoretical convergence rate and practical performance for extremely large seismic imaging problems.},
	keywords = {MSc, thesis},
	url = {https://slim.gatech.edu/Publications/Public/Thesis/2014/miao2014THesi/miao2014THesi.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Thesis/2014/miao2014THesi/miao2014THesi_pres.pdf},
	author = {Lina Miao}
}
@mastersthesis {almatar10THesd,
	title = {Estimation of surface-free data by curvelet-domain matched filtering and sparse inversion},
	year = {2010},
	note = {(MSc)},
	month = {12},
	school = {The University of British Columbia},
	type = {masters},
	address = {Vancouver},
	abstract = {A recent robust multiple-elimination technique, based on the underlying principle that relates primary impulse response to total upgoing wavefield, tries to change the paradigm that sees surface-related multiples as noise that needs to be removed from the data prior to imaging. This technique, estimation of primaries by sparse inversion (EPSI), (van Groenestijn and Verschuur, 2009; Lin and Herrmann, 2009), proposes an inversion procedure during which the source function and surface- free impulse response are directly calculated from the upgoing wavefield using an alternating optimization procedure. EPSI hinges on a delicate interplay between surface-related multiples and pri- maries. Finite aperture and other imperfections may violate this relationship. In this thesis, we investigate how to make EPSI more robust by incorporating curvelet-domain matching in its formulation. Compared to surface-related multiple removal (SRME), where curvelet-domain matching was used successfully, incorporating this step has the additional advantage that matches multiples to multiples rather than predicated multiples to total data as in SRME.},
	keywords = {MSc},
	url = {https://slim.gatech.edu/Publications/Public/Thesis/2010/almatar10THesd.pdf},
	author = {Mufeed H. AlMatar}
}
