@conference {zhang2021SEGapw,
	title = {A practical workflow for land seismic wavefield recovery with weighted matrix factorization},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2021},
	note = {(IMAGE, Denver)},
	month = {09},
	pages = {145-149},
	abstract = {While wavefield reconstruction through weighted low-rank matrix factorizations has been shown to perform well on marine data, out-of-the-box application of this technology to land data is hampered by ground roll. The presence of these strong surface waves tends to dominate the reconstruction at the expense of the weaker body waves. Because ground roll is slow, it also suffers more from aliasing. To overcome these challenges, we introduce a practical workflow where the ground roll and body wave components are recovered separately and combined. We test the proposed approach blindly on a subset of the 3D SEAM Barrett dataset. With our technique, we recover densely sampled data from 25 percent randomly subsampled receivers. Independent comparisons on a single shot demonstrate significant improvements achievable with the presented workflow.},
	keywords = {3D SEAM Barrett dataset, ground roll, SEG, wavefield reconstruction, weighted matrix factorization},
	doi = {10.1190/segam2021-3594419.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2021/zhang2021SEGapw/Yijun2021.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2021/zhang2021SEGapw/zhang2021SEGapw_pres.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2021/zhang2021SEGapw/zhang2021SEGapw.mp4},
	software = {https://github.com/slimgroup/Software.SEG2021},
	author = {Yijun Zhang and Felix J. Herrmann}
}
@conference {rizzuti2020SEGuqavp,
	title = {Parameterizing uncertainty by deep invertible networks, an application to reservoir characterization},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2020},
	note = {(SEG, virtual)},
	month = {09},
	pages = {1541-1545},
	abstract = {Uncertainty quantification for full-waveform inversion provides a probabilistic characterization of the ill-conditioning of the problem, comprising the sensitivity of the solution with respect to the starting model and data noise. This analysis allows to assess the confidence in the candidate solution and how it is reflected in the tasks that are typically performed after imaging (e.g., stratigraphic segmentation following reservoir characterization). Classically, uncertainty comes in the form of a probability distribution formulated from Bayesian principles, from which we seek to obtain samples. A popular solution involves Monte Carlo sampling. Here, we propose instead an approach characterized by training a deep network that "pushes forward" Gaussian random inputs into the model space (representing, for example, density or velocity) as if they were sampled from the actual posterior distribution. Such network is designed to solve a variational optimization problem based on the Kullback-Leibler divergence between the posterior and the network output distributions. This work is fundamentally rooted in recent developments for invertible networks. Special invertible architectures, besides being computational advantageous with respect to traditional networks, do also enable analytic computation of the output density function. Therefore, after training, these networks can be readily used as a new prior for a related inversion problem. This stands in stark contrast with Monte-Carlo methods, which only produce samples. We validate these ideas with an application to angle-versus-ray parameter analysis for reservoir characterization.},
	keywords = {Full-waveform inversion, SEG, Uncertainty quantification},
	doi = {10.1190/segam2020-3428150.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2020/rizzuti2020SEGuqavp/rizzuti2020SEGuqavp.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2020/rizzuti2020SEGuqavp/rizzuti2020SEGuqavp_pres.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2020/rizzuti2020SEGuqavp/rizzuti2020SEGuqavp_pres.mp4},
	software = {https://github.com/slimgroup/Software.SEG2020},
	author = {Gabrio Rizzuti and Ali Siahkoohi and Philipp A. Witte and Felix J. Herrmann}
}
@conference {peters2016SEGprs,
	title = {Parallel reformulation of the sequential adjoint-state method},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2016},
	note = {(SEG, Dallas)},
	month = {10},
	pages = {1411-1415},
	abstract = {This abstract is about reducing the total computation time to solve full-waveform inversion problems. A common problem formulation is a nonlinear least-squares problem where the gradient is computed using the adjoint-state algorithm. This formulation offers parallelism for the computation of gradients for different sources and frequencies. The adjoint-state algorithm itself is sequential however and this is a limiting factor when a lot of compute nodes are available and only a few wavefields need to be computed. This situation occurs when stochastic optimization strategies are used to minimize the objective function. We present a parallel reformulation of the sequential adjoint-state algorithm, which allows the forward- and adjoint wavefields to be computed in parallel. Both algorithms are mathematically equivalent but the parallel version is twice as fast in run time. An important characteristic of the proposed algorithm is that one wavefield needs to be computed per source and one per receiver. These fields can be used to apply the (inverse) Gauss-Newton Hessian to a vector without recomputing wavefields. A 2D example shows that good full-waveform inversion results are obtained, even when a small number of sources and receivers is used.},
	keywords = {FWI, numerical linear algebra, parallel computing, PDE-constrained optimization, SEG},
	doi = {10.1190/segam2016-13966771.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/peters2016SEGprs/peters2016SEGprs.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/peters2016SEGprs/peters2016SEGprs_pres.pdf},
	author = {Bas Peters and Tristan van Leeuwen and Felix J. Herrmann}
}
@conference {witte2016SEGpve,
	title = {Phase velocity error minimizing scheme for the anisotropic pure P-wave equation},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2016},
	note = {(SEG, Dallas)},
	month = {10},
	pages = {452-457},
	abstract = {Pure P-wave equations for acoustic modeling in transverse isotropic media are derived by approximating the exact pure Pwave dispersion relation. In this work, we present an alternative approach to the approximate dispersion relation of Etgen and Brandsberg-Dahl, in which we approximate the exact dispersion relation through a polynomial expansion and determine its coefficients by solving a linear least squares problem that minimizes the phase velocity error over the entire range of phase angles. The coefficients are also optimized over a pre-defined range of Thomsen parameters, so that the phase error is small for models with spatially varying anisotropy. Phase velocity error analysis shows that the optimized pure P-wave equation is up to one order of magnitude more accurate than other popular pure P-wave equations, even for highly non-elliptic anisotropy. The optimized equation can be easily turned into a time-domain forward modeling scheme and comparisons of the modeled waveforms with analytical travel times once more illustrate its high accuracy. We also provide an efficient implementation of our approach for 3D tilted TI media that limits the count of fast Fourier transforms per time step to a number that is comparable to other pure P-wave equations.},
	keywords = {anisotropy, least squares, Modelling, SEG, TTI},
	doi = {10.1190/segam2016-13844850.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/witte2016SEGpve/witte2016SEGpve.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/witte2016SEGpve/witte2016SEGpve_poster.pdf},
	author = {Philipp A. Witte and Christiaan C. Stolk and Felix J. Herrmann}
}
@conference {herrmann2013SEGpmc,
	title = {A penalty method for PDE-constrained optimization with applications to wave-equation based seismic inversion},
	booktitle = {SEG Workshop on Computational Mathematics for Geophysics; Houston},
	year = {2013},
	month = {09},
	keywords = {Optimization, penalty method, SEG, workshop},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2013/herrmann2013SEGpmc/herrmann2013SEGpmc_pres.pdf},
	author = {Tristan van Leeuwen and Felix J. Herrmann}
}
@techreport {vanleeuwen2012SEGparallel,
	title = {A parallel, object-oriented framework for frequency-domain wavefield imaging and inversion.},
	number = {TR-EOAS-2012-2},
	year = {2012},
	month = {04},
	institution = {Department of Earth and Ocean Sciences},
	address = {University of British Columbia, Vancouver},
	abstract = {We present a parallel object-oriented matrix-free framework for frequency-domain seismic modeling, imaging and inversion. The key aspects of the framework are its modularity and level of abstraction, which allows us to write code that reflects the underlying mathematical structure and develop unit-tests that guarantee the fidelity of the code. By overloading standard linear-algebra operations, such as matrix-vector multiplications, we can use standard optimization packages to work with our code without any modification. This leads to a scalable testbed on which new methods can be rapidly prototyped and tested on medium-sized 2D problems. Although our current implementation uses (parallel) Matlab, all of these design principles can also be met by using lower-level languages which is important when we want to scale to realistic 3D problems. We present some numerical examples on synthetic data.},
	keywords = {Imaging, inversion, Modeling, SEG},
	url = {https://slim.gatech.edu/Publications/Public/TechReport/2012/vanleeuwen2012SEGparallel/vanleeuwen2012SEGparallel.pdf},
	author = {Tristan van Leeuwen and Felix J. Herrmann}
}
@conference {vanleeuwen2011SEGext,
	title = {Probing the extended image volume},
	booktitle = {SEG Technical Program Expanded Abstracts},
	volume = {30},
	year = {2011},
	month = {09},
	pages = {4045-4050},
	publisher = {SEG},
	organization = {SEG},
	abstract = {The prestack image volume can be defined as a cross- correlation of the source and receivers wavefields for non-zero space and time lags. If the background velocity is kinemati- cally acceptable, this image volume will have its main contributions at zero lag, even for complex models. Thus, it is an ideal tool for wave-equation migration velocity analysis in the presence of strong lateral heterogeneity. In particular, it allows us to pose migration velocity analysis as a PDE-constrained optimization problem, where the goal is to minimize the energy in the image volume at non-zero lag subject to fitting the data approximately. However, it is computationally infeasi- ble to explicitly form the whole image volume. In this paper, we discuss several ways to reduce the computational costs involved in computing the image volume and evaluating the focusing criterion. We reduce the costs for calculating the data by randomized source synthesis. We also present an efficient way to subsample the image volume. Finally, we propose an alternative optimization criterion and suggest a multiscale inversion strategy for wave-equation MVA.},
	keywords = {Imaging, SEG},
	doi = {10.1190/1.3628051},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2011/vanleeuwen11SEGext/vanleeuwen11SEGext.pdf},
	author = {Tristan van Leeuwen and Felix J. Herrmann}
}
@conference {thomson2006SEGpwfd,
	title = {A parallel windowed fast discrete curvelet transform applied to seismic processing},
	booktitle = {SEG Technical Program Expanded Abstracts},
	volume = {25},
	year = {2006},
	pages = {2767-2771},
	publisher = {SEG},
	organization = {SEG},
	abstract = {We propose using overlapping, tapered windows to process seismic data in parallel. This method consists of numerically tight linear oper ators and adjoints that are suitable for use in iterative algorithms. This method is also highly scalable and makes parallel processing of large seismic data sets feasible. We use this scheme to define the Parallel Windowed Fast Discrete Curvelet Transform (PWFDCT), which we apply to a seismic data interpolation algorithm. The successful performance of our parallel processing scheme and algorithm on a two-dimensional synthetic data is shown.},
	keywords = {SEG},
	doi = {10.1190/1.2370099},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2006/thomson06SEGpwfd/thomson06SEGpwfd.pdf},
	author = {Darren Thomson and Gilles Hennenfent and Henryk Modzelewski and Felix J. Herrmann}
}
