@mastersthesis {tu2015THfis,
	title = {Fast imaging with surface-related multiples},
	year = {2015},
	note = {(PhD)},
	month = {08},
	school = {The University of British Columbia},
	type = {phd},
	address = {Vancouver},
	abstract = {Surface-related multiples, which are waves that bounce more than once between the water surface and the subsurface reflectors, constitute a significant part of the data acquired in marine seismic surveys. If left untreated, they can lead to misplaced phantom reflectors in the image, and result in erroneous interpretations of the subsurface structure. As a result, these multiples are removed before the imaging procedure in conventional seismic data processing. However, because they interact more with the subsurface medium, they may carry extra information that is not present in the primaries. Therefore instead of removing these multiples, a more desirable alternative is to make active use of them. We derive from the well-established "Surface-Related Multiple Elimination" relation, and arrive at a linearized expression of the wave-equation based modelling that incorporates the surface- related multiples. We then present a computationally efficient approach to iteratively invert this expression to obtain an image of the subsurface from data that contain multiples. We achieve the computational efficiency inside each iteration by (i) using the wave-equation solver to implicitly carry out the expensive multiple prediction; and (ii) reducing the number of wave-equation solves during data simulation by subsampling the monochromatic source experiments. We show that, compared with directly applying the cross-correlation/deconvolutional imaging conditions, the presented approach can suppress the coherent imaging artifacts from multiples more effectively. We also show that, by curvelet-domain sparsity promoting and occasionally drawing new data samples during the inversion, the proposed inversion method gains improved robustness to velocity errors in the background model, as well as modelling errors incurred during linearization of the wave-equation. To combine the information encoded in both the primaries and the multiples, we then propose a highly accurate source estimation method to jointly invert the total upgoing wavefield. We show with field data examples that we can reap benefits from both the relative noise-free primaries and the extra illumination coverage of the multiples. We also demonstrate that the inclusion of multiples help mitigate the amplitude ambiguity during source estimation. We conclude the thesis with an outlook for future research directions, as well as potential extensions of the proposed work.},
	keywords = {inversion, least-squares, multiples, seismic imaging},
	url = {https://slim.gatech.edu/Publications/Public/Thesis/2015/tu2015THfis/tu2015THfis.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Thesis/2015/tu2015THfis/tu2015THfis_pres.pdf},
	author = {Ning Tu}
}
@article {tu2014fis,
	title = {Fast imaging with surface-related multiples by sparse inversion},
	journal = {Geophysical Journal International},
	volume = {201},
	number = {1},
	year = {2015},
	note = {(Geophysical Journal International)},
	month = {04},
	pages = {304-317},
	abstract = {In marine exploration seismology, surface-related multiples are usually treated as noise mainly because subsequent processing steps, such as migration velocity analysis and imaging, require multiple-free data. Failure to remove these wavefield components from the data may lead to erroneous estimates for migration velocity or result in strong coherent artefacts that interfere with the imaged reflectors. However, multiples can carry complementary information compared to primaries, as they interact with the free surface and are therefore exposed more to the subsurface. Recent work has shown that when processed correctly multiples can improve seismic illumination. Given a sufficiently accurate background velocity model and an estimate for the source signature, we propose a new and computationally efficient linearized inversion procedure based on two-way wave equations, which produces accurate images of the subsurface from the total upgoing wavefield including surface-related multiples. Modelling of the surface-related multiples in the proposed method derives from the well-known surface-related multiple elimination method. We incur a minimal overhead from incorporating the multiples by having the wave-equation solver carry out the multiple predictions via the inclusion of an areal source instead of expensive dense matrix-matrix multiplications. By using subsampling techniques, we obtain high-quality true-amplitude least-squares migrated images at computational costs of roughly a single reverse-time migration (RTM) with all the data. These images are virtually free of coherent artefacts from multiples. Proper inversion of the multiples would be computationally infeasible without using these techniques that significantly bring down the cost. By promoting sparsity in the curvelet domain and using rerandomization, out method gains improved robustness to errors in the background velocity model, and errors incurred in the linearization of the wave equation with respect to the model. We demonstrate the superior performance of the proposed method compared to the conventional RTM using realistic synthetic examples.},
	keywords = {approximate message passing, Compressive Sensing, curvelet, inversion, Kaczmarz, multiples},
	url = {https://slim.gatech.edu/Publications/Public/Journals/GeophysicalJournalInternational/2014/tu2014fis/tu2014fis.pdf},
	url2 = {http://gji.oxfordjournals.org/cgi/content/full/ggv020?ijkey=pKzrSXbtxjlOjzd\&keytype=ref},
	author = {Ning Tu and Felix J. Herrmann}
}
@presentation {yang2015SINBADFfis,
	title = {Fast imaging with surface-related multiples: {\textendash} shallow water multiples},
	year = {2015},
	publisher = {SINBAD},
	abstract = {In this talk, we will show surface-related multiples imaging with source estimation. Here the algorithms are based on linearized bregman, and we give the source estimation formulation in this case. With the featured blocked structure of linearized bregman, we can do efficient imaging in straightforward way by randomly choosing sources and frequencies. Another benefit is the simplicity to delivery the algorithm.},
	keywords = {Presentation, SINBAD, SINBADFALL2015, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/yang2015SINBADFfis/yang2015SINBADFfis.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/yang2015SINBADFfis/yang2015SINBADFfis.mov},
	author = {Mengmeng Yang and Ning Tu and Felix J. Herrmann}
}
@article {tu2015TLEfls,
	title = {Fast least-squares imaging with surface-related multiples: application to a North-Sea data set},
	journal = {The Leading Edge},
	volume = {34},
	number = {7},
	year = {2015},
	note = {(The Leading Edge)},
	month = {07},
	pages = {788{\textendash}794},
	abstract = {In marine seismic acquisition, surface-related multiples constitute a significant portion of the acquired data. Typically, multiples are removed during early-stage data-processing as they can lead to phantom reflectors during migration that may result in erroneous geological interpretations. However, if properly dealt with, multiples can provide valuable extra information and complement primaries in illuminating the subsurface. In this article, we demonstrate the limitation of the reverse-time migration in imaging these multiples, and present an alternative inversion procedure that is computationally efficient, that jointly maps both primaries and multiples to the true reflectors, and where the source function is estimated on the fly. As a result, we obtain high-quality, mostly artifact-free, broad-band images where the imprint of the source-function are partly removed at a computationally affordable expense compared to the combined costs of the wave-equation based surface-related multiple elimination and the reverse-time migration. We achieve all this by including the total downgoing wavefields as areal sources in the least-squares migration in combination with curvelet-domain sparsity promotion. We apply the proposed method to a shallow-water marine data set from the North sea, which contains abundant short-period surface-related multiples, and show its efficacy in eliminating coherent imaging artifacts associated with these multiples. We also demonstrate the benefits of joint imaging of primaries and multiples compared to imaging these signal components separately.},
	keywords = {field data, inversion, least squares, migration, multiples},
	doi = {10.1190/tle34070788.1},
	url = {https://slim.gatech.edu/Publications/Public/Journals/TheLeadingEdge/2015/tu2015TLEfls/tu2015TLEfls.html},
	author = {Ning Tu and Felix J. Herrmann}
}
@conference {herrmann2015EAGEfom,
	title = {Fast "online" migration with Compressive Sensing},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2015},
	note = {(EAGE, Madrid)},
	month = {06},
	abstract = {We present a novel adaptation of a recently developed relatively simple iterative algorithm to solve large-scale sparsity-promoting optimization problems. Our algorithm is particularly suitable to large-scale geophysical inversion problems, such as sparse least-squares reverse-time migration or Kirchoff migration since it allows for a tradeoff between parallel computations, memory allocation, and turnaround times, by working on subsets of the data with different sizes. Comparison of the proposed method for sparse least-squares imaging shows a performance that rivals and even exceeds the performance of state-of-the art one-norm solvers that are able to carry out least-squares migration at the cost of a single migration with all data.},
	keywords = {EAGE, LSRTM},
	doi = {10.3997/2214-4609.201412942},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2015/herrmann2015EAGEfom/herrmann2015EAGEfom.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2015/herrmann2015EAGEfom/herrmann2015EAGEfom_pres.pdf},
	author = {Felix J. Herrmann and Ning Tu and Ernie Esser}
}
@presentation {tu2014SINBADfis2,
	title = {Fast imaging with source estimation},
	year = {2014},
	publisher = {SINBAD},
	abstract = {In seismic imaging, an inaccurate estimate of the source wavelet may result in degraded seismic images. While conventional reverse-time migration requires the knowledge of the source wavelet as prior information, we propose to include source estimation in the fast compressive imaging procedure. Using the proposed method, we can obtain seismic images that are comparable to those imaged with the true source wavelet, with computational costs that are comparable to conventional RTM images with all the data. We also extend the proposed method to image data with surface-related multiples, where these multiples help to mitigate the amplitude ambiguity in source estimation. We verify the proposed method using realistic synthetic examples.},
	keywords = {Presentation, SINBAD, SINBADFALL2014, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2014/Fall/tu2014SINBADfis2/tu2014SINBADfis2.pdf},
	author = {Ning Tu and Aleksandr Y. Aravkin and Tristan van Leeuwen and Tim T.Y. Lin and Felix J. Herrmann}
}
@presentation {tu2014SINBADfis,
	title = {Fast imaging with surface-related multiples by sparse inversion},
	year = {2014},
	publisher = {SINBAD},
	abstract = {When used correctly, surface-related multiples can provide extra illumination coverage compared with primaries. In this talk, I will discuss how to jointly image primaries and surface-related multiples in a computationally efficient fashion. We bring down the computational cost by two means. First we use wave-equation solvers to implicitly carry out the expensive dense matrix-matrix multiplications in the prediction of surface-related multiples. Second we bring down the simulation cost by subsampling the frequencies and monochromatic source experiments together with curvelet-domain sparsity-promoting and rerandomization. As a result, we obtain true-amplitude least-squares migrated seismic images with computational costs that are comparable to a single RTM with all the data. We demonstrate the efficacy of the proposed method using realistic synthetic examples.},
	keywords = {Presentation, SINBAD, SINBADFALL2014, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2014/Fall/tu2014SINBADfis/tu2014SINBADfis.pdf},
	author = {Ning Tu and Felix J. Herrmann}
}
@conference {herrmann2014SEGWSfli,
	title = {Fast linearized inversion with surface-related multiples with source estimation},
	booktitle = {SEG Workshop on Using Multiples as Signal for Imaging; Denver},
	year = {2014},
	note = {(SEG Workshop, Denver)},
	month = {10},
	abstract = {In the well-known SRME relation, multiples are expressed as the multi-dimensional convolution between the subsurface Green{\textquoteright}s function and the downgoing receiver wavefield. Therefore these multiples can be considered as the response of the subsurface to an "areal" source term given by the same downgoing receiver wavefield. This relation can be used to treat these multiples as signals instead of considering them as noise that must removed before seismic imaging. However, when we use conventional reverse-time migration to image these multiple events, it results in acausal imaging artifacts caused by cross-correlations between wrong pairs of up- and downgoing wavefields. We find that these artifacts can be removed by adopting a sparsity-promoting least-squares inversion approach. However, iterative inversions go at the expense of excessive computational costs. By combining the SRME relation and wave-equation based linearized modelling, we are able to significantly reduce the costs by avoiding the dense matrix-matrix multiplications of SRME and the number of wave-equation solves via source subsampling. As a result, we arrive at a method with a cost comparable to that of a single reverse-time migration with all shots.},
	keywords = {inversion, multiples, SEG, workshop},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2014/herrmann2014SEGWSfli/herrmann2014SEGWSfli.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2014/herrmann2014SEGWSfli/herrmann2014SEGWSfli_pres.pdf},
	author = {Ning Tu and Felix J. Herrmann}
}
@presentation {tu2013SINBADfim,
	title = {Fast imaging with multiples and source estimation},
	year = {2013},
	publisher = {SINBAD},
	abstract = {During this talk, we present a computationally efficient (cost of 1-2 RTMs with all data) iterative sparsity-promoting inversion framework where surface-related multiples are jointly imaged with primaries and where the source signature is estimated on the fly. Our imaging algorithm is computationally efficient because it works during each iteration with small independent randomized subsets of data. The multiples are handled by introducing an areal source term that includes the upgoing wavefield. We update the source signature for each iteration using a variable projection method. The resulting algorithm removes imaging artifacts from surface-related multiples, estimates and removes the imprint of the source, recovers true amplitudes, is fast, and robust to linearization errors by virtue of the statistical independence of the subsets of data we are working with at each iteration.},
	keywords = {Presentation, SINBAD, SINBADFALL2013, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2013/Fall/tu2013SINBADfim/tu2013SINBADfim.pdf},
	author = {Ning Tu and Felix J. Herrmann}
}
@presentation {tu2013SINBADvp,
	title = {Fast imaging with multiples and source estimation},
	year = {2013},
	publisher = {SINBAD},
	abstract = {Multiples are usually treated as unwanted components in seismic data. However, if correctly used, they can provide valuable information about the subsurface. In this presentation, I will talk about how to make use of multiples in $\ell_1$ regularized least-squares imaging, and how to estimate the source wavelet on the fly using multiples. Synthetic examples show that using multiples not only helps to retrieve the true-amplitude seismic image and the source wavelet, it also increases the wavenumber contents in the seismic image. By using dimensionality reduction techniques with rerandomization, we also greatly decrease the simulation cost without compromising the image quality.},
	keywords = {Presentation, SINBAD, SINBADSPRING2013, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2013/Spring/tu2013SINBADvp/tu2013SINBADvp.pdf},
	author = {Ning Tu and Aleksandr Y. Aravkin and Tristan van Leeuwen and Felix J. Herrmann}
}
@conference {tu2013EAGElsm,
	title = {Fast least-squares migration with multiples and source estimation},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2013},
	month = {06},
	abstract = {The advent of modern computing has made it possible to do seismic imaging using least-squares reverse-time migration. We obtain superior images by solving an optimization problem that recovers the true-amplitude images. However, its success hinges on overcoming several issues, including overwhelming problem size, unknown source wavelet, and interfering coherent events like multiples. In this abstract, we reduce the problem size by using ideas from compressive sensing, and estimate source wavelet by generalized variable projection. We also demonstrate how to invert for subsurface information encoded in surface-related multiples by incorporating the free-surface operator as an areal source in reverse-time migration. Our synthetic examples show that multiples help to improve the resolution of the image, as well as remove the amplitude ambiguity in wavelet estimation.},
	keywords = {EAGE, Imaging, multiples, source estimation, sparse},
	doi = {10.3997/2214-4609.20130727},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/tu2013EAGElsm/tu2013EAGElsm.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/tu2013EAGElsm/tu2013EAGElsm_pres.pdf},
	author = {Ning Tu and Aleksandr Y. Aravkin and Tristan van Leeuwen and Felix J. Herrmann}
}
@conference {herrmann2013EAGEfrtm,
	title = {Fast RTM with multiples and source estimation},
	booktitle = {EAGE/SEG Forum - Turning noise into geological information: The next big step?},
	year = {2013},
	month = {11},
	abstract = {During this talk, we present a computationally efficient (cost of 1-2 RTM{\textquoteright}s with all data) iterative sparsity-promoting inversion framework where surface-related multiples are jointly imaged with primaries and where the source signature is estimated on the fly. Our imaging algorithm is computationally efficient because it works during each iteration with small independent randomized subsets of data. The multiples are handled by introducing an areal source term that includes the upgoing wavefield. We update the source signature for each iteration using a variable projection method. The resulting algorithm removes imaging artifacts from surface-related multiples, estimates and removes the imprint of the source, recovers true amplitudes, is fast, and robust to linearization errors by virtue of the statistical independence of the subsets of data we are working with at each iteration.},
	keywords = {EAGE, multiples, RTM, SEG, source estimation},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/herrmann2013EAGEfrtm/herrmann2013EAGEfrtm_pres.pdf},
	author = {Felix J. Herrmann and Ning Tu}
}
@presentation {ning2012SINBADfim,
	title = {Fast imaging with multiples},
	year = {2012},
	publisher = {SINBAD},
	abstract = {If correctly used, multiple energy can be mapped to the correct subsurface locations. However, simply applying the cross-correlation imaging condition will introduce non-causal artifacts into the final image. Here we propose an inversion approach to image primaries and multiples simultaneously that yields an artifact-free image. To address the high computational cost associated with inversion, we propose to: i) have the wave-equation solver carry out the multi-dimensional convolutions implicitly, and ii) reduce the number of PDE solves by randomized subsampling. We then propose to improve the overall performance of this algorithm by a process called rerandomization, which helps to cancel the correlation built between model iterate and the subsampling operator. We show the merits of our approach on a number of examples.},
	keywords = {Presentation, SINBAD, SINBADFALL2012, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2012/Fall/ning2012SINBADfim/ning2012SINBADfim_pres.pdf},
	author = {Ning Tu}
}
@presentation {ning2012SINBADSPRINGfim,
	title = {Fast imaging with multiples by sparse inversion},
	year = {2012},
	publisher = {SINBAD},
	keywords = {Presentation, SINBAD, SINBADSPRING2012, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2012/Spring/ning2012SINBADSPRINGfim/ning2012SINBADSPRINGfim_pres.pdf},
	author = {Ning Tu}
}
