@article {wason2016GEOPctl,
	title = {Low-cost time-lapse seismic with distributed compressive sensing{\textendash}-Part 2: impact on repeatability},
	journal = {Geophysics},
	volume = {82},
	number = {3},
	year = {2017},
	note = {(Geophysics)},
	month = {05},
	pages = {P15-P30},
	abstract = {Irregular or off-the-grid spatial sampling of sources and receivers is inevitable in field seismic acquisitions. Consequently, time-lapse surveys become particularly expensive since current practices aim to replicate densely sampled surveys for monitoring changes occurring in the reservoir due to hydrocarbon production. We demonstrate that under certain circumstances, high-quality prestack data can be obtained from cheap randomized subsampled measurements that are observed from nonreplicated surveys. We extend our time-jittered marine acquisition to time-lapse surveys by designing acquisition on irregular spatial grids that render simultaneous, subsampled and irregular measurements. Using the fact that different time-lapse data share information and that nonreplicated surveys add information when prestack data are recovered jointly, we recover periodic densely sampled and colocated prestack data by adapting the recovery method to incorporate a regularization operator that maps traces from an irregular spatial grid to a regular periodic grid. The recovery method is, therefore, a combined operation of regularization, interpolation (estimating missing fine-grid traces from subsampled coarse-grid data), and source separation (unraveling overlapping shot records). By relaxing the insistence on replicability between surveys, we find that recovery of the time-lapse difference shows little variability for realistic field scenarios of slightly nonreplicated surveys that suffer from unavoidable natural deviations in spatial sampling of shots (or receivers) and pragmatic compressed-sensing based nonreplicated surveys when compared to the "ideal" scenario of exact replicability between surveys. Moreover, the recovered densely sampled prestack baseline and monitor data improve significantly when the acquisitions are not replicated, and hence can serve as input to extract poststack attributes used to compute time-lapse differences. Our observations are based on experiments conducted for an ocean-bottom cable survey acquired with time-jittered continuous recording assuming source equalization (or same source signature) for the time-lapse surveys and no changes in wave heights, water column velocities or temperature and salinity profiles, etc.},
	keywords = {joint recovery method, Marine acquisition, off-the-grid recovery, Optimization, random sampling, time-lapse seismic},
	doi = {10.1190/geo2016-0252.1},
	url = {https://slim.gatech.edu/Publications/Public/Journals/Geophysics/2017/wason2016GEOPctl/wason2016GEOPctl.html},
	author = {Haneet Wason and Felix Oghenekohwo and Felix J. Herrmann}
}
@mastersthesis {wason2017THsss,
	title = {Simultaneous-source seismic data acquisition and processing with compressive sensing},
	year = {2017},
	note = {(PhD)},
	month = {08},
	school = {The University of British Columbia},
	type = {phd},
	address = {Vancouver},
	abstract = {The work in this thesis adapts ideas from the field of compressive sensing (CS) that lead to new insights into acquiring and processing seismic data, where we can fundamentally rethink how we design seismic acquisition surveys and process acquired data to minimize acquisition- and processing-related costs. Current efforts towards dense source/receiver sampling and full azimuthal coverage to produce high-resolution images of the subsurface have led to the deployment of multiple sources across survey areas. A step ahead from multisource acquisition is simultaneous-source acquisition, where multiple sources fire shots at near-simultaneous/random times resulting in overlapping shot records, in comparison to no overlaps during conventional sequential-source acquisition. Adoption of simultaneous-source techniques has helped to improve survey efficiency and data density. The engine that drives simultaneous-source technology is simultaneous-source separation {\textendash}- a methodology that aims to recover conventional sequential-source data from simultaneous-source data. This is essential because many seismic processing techniques rely on dense and periodic (or regular) source/receiver sampling. We address the challenge of source separation through a combination of tailored simultaneous-source acquisition design and sparsity-promoting recovery via convex optimization using l1 objectives. We use CS metrics to investigate the relationship between marine simultaneous-source acquisition design and data reconstruction fidelity, and consequently assert the importance of randomness in the acquisition system in combination with an appropriate choice for a sparsifying transform (i.e., curvelet transform) in the reconstruction algorithm. We also address the challenge of minimizing the cost of expensive, dense, periodically-sampled and replicated time-lapse surveying and data processing by adapting ideas from distributed compressive sensing. We show that compressive randomized time-lapse surveys need not be replicated to attain acceptable levels of data repeatability, as long as we know the shot positions (post acquisition) to a sufficient degree of accuracy. We conclude by comparing sparsity-promoting and rank-minimization recovery techniques for marine simultaneous-source separation, and demonstrate that recoveries are comparable; however, the latter approach readily scales to large-scale seismic data and is computationally faster.},
	keywords = {Acquisition, Compressive Sensing, marine, Optimization, PhD, simultaneous source, source separation},
	url = {https://slim.gatech.edu/Publications/Public/Thesis/2017/wason2017THsss/wason2017THsss.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Thesis/2017/wason2017THsss/wason2017THsss_pres.pdf},
	author = {Haneet Wason}
}
@article {kumar2015sss,
	title = {Source separation for simultaneous towed-streamer marine acquisition {\textendash}- a compressed sensing approach},
	journal = {Geophysics},
	volume = {80},
	number = {6},
	year = {2015},
	note = {(Geophysics)},
	month = {11},
	pages = {WD73-WD88},
	abstract = {Simultaneous marine acquisition is an economic way to sample seismic data and speed up acquisition, wherein single or multiple source vessels fire sources at near-simultaneous or slightly random times, resulting in overlapping shot records. The current paradigm for simultaneous towed-streamer marine acquisition incorporates {\textquotedblleft}low variability{\textquotedblright} in source firing times, i.e., 0 <= 1 or 2 s because the sources and receivers are moving. This results in a low degree of randomness in simultaneous data, which is challenging to separate (into its constituent sources) using compressed-sensing-based separation techniques because randomization is key to successful recovery via compressed sensing. We have addressed the challenge of source separation for simultaneous towed-streamer acquisitions via two compressed-sensing-based approaches, i.e., sparsity promotion and rank minimization. We have evaluated the performance of the sparsity-promotion- and rank-minimization-based techniques by simulating two simultaneous towed-streamer acquisition scenarios, i.e., over/under and simultaneous long offset. A field data example from the Gulf of Suez for the over/under acquisition scenario was also developed. We observed that the proposed approaches gave good and comparable recovery qualities of the separated sources, but the rank-minimization technique outperformed the sparsity-promoting technique in terms of the computational time and memory. We also compared these two techniques with the normal-moveout-based median-filtering-type approach, which had comparable results.},
	keywords = {2D, Acquisition, inversion, marine, Optimization, Rank, source separation, sparsity},
	doi = {10.1190/geo2015-0108.1},
	url = {https://slim.gatech.edu/Publications/Public/Journals/Geophysics/2015/kumar2015sss/kumar2015sss_revised.pdf},
	url2 = {http://library.seg.org/doi/abs/10.1190/geo2015-0108.1},
	author = {Rajiv Kumar and Haneet Wason and Felix J. Herrmann}
}
@article {herrmann2013TLEffwi,
	title = {Frugal full-waveform inversion: from theory to a practical algorithm},
	journal = {The Leading Edge},
	volume = {32},
	number = {9},
	year = {2013},
	month = {09},
	pages = {1082-1092},
	abstract = {As conventional oil and gas fields are maturing, our profession is challenged to come up with the next-generation of more and more sophisticated exploration tools. In exploration seismology this trend has led to the emergence of wave-equation based inversion technologies such as reverse-time migration and full-waveform inversion. While significant progress has been made in wave-equation based inversion, major challenges remain in the development of robust and computationally feasible workflows that give reliable results in geophysically challenging areas that may include ultra-low shear velocity zones or high-velocity salt. Moreover, sub-salt production carries risks that needs mitigation, which raises the bar from creating sub-salt images to inverting for sub-salt overpressure.},
	keywords = {Optimization, waveform inversion},
	doi = {10.1190/tle32091082.1},
	url = {https://slim.gatech.edu/Publications/Public/Journals/TheLeadingEdge/2013/herrmann2013ffwi/herrmann2013ffwi.html},
	author = {Felix J. Herrmann and Andrew J. Calvert and Ian Hanlon and Mostafa Javanmehri and Rajiv Kumar and Tristan van Leeuwen and Xiang Li and Brendan R. Smithyman and Eric Takam Takougang and Haneet Wason}
}
