@conference {yang2019SEGlrr,
	title = {Low-rank representation of subsurface extended image volumes with power iterations},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2019},
	note = {(SEG, San Antonio)},
	month = {09},
	pages = {4470-4474},
	abstract = {Full subsurface extended image volumes (EIVs) contain abundant information such as subsurface image gathers used in imaging, interpretation of rock properties or velocity analysis, but are expensive in term of computational cost and storage requirement due to their large size. Yet, due to their redundant information, monochromatic EIVs exhibit a low-rank structure that allows us to get a good approximation at a computational cost proportional to the rank k , while conventional techniques require at least the number of sources. Such low-rank factorized EIVs are computed thanks to the randomized singular values decomposition (SVD) algorithm. However, recent developments on low-rank approximations of EIVs raise two major questions. First, monochromatic EIVs rely on time-harmonic wave equation solvers, which do not scale well to realistic 3D models. Second, the rank of the monochromatic EIVs increases with the frequency, which yields increasing computational costs and storage. Here, we propose a construction approach based on a time-domain finite-difference wave-equation solver with time stepping, which is combined to power iteration schemes in the randomized SVD algorithm to accelerate the decay of the singular values. We compare the performances of simultaneous iterations, block-Krylov iterations and the original randomized SVD on the computation of the EIV for a small section of the Marmousi model. Then, we show further results on the full Marmousi model to validate our approach.},
	keywords = {full extended image volumes, power iterations, randomized SVD, SEG, time domain},
	doi = {10.1190/segam2019-3215961.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2019/yang2019SEGlrr/yang2019SEGlrr.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2019/yang2019SEGlrr/yang2019SEGlrr_pres.pdf},
	author = {Mengmeng Yang and Marie Graff and Rajiv Kumar and Felix J. Herrmann}
}
@conference {yang2018SEGrde,
	title = {Removing density effects in LS-RTM with a low-rank matched filter},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2018},
	note = {(SEG, Anaheim)},
	month = {10},
	pages = {4251-4255},
	abstract = {Least-squares reverse-time migration faces difficulties when it inverts the data containing strong components related to density variation with velocity-only Born modeling operator. The strong density perturbation will be inverted as strong dummy velocity perturbations, which influence the amplitudes and phase of the velocity perturbations in the inverted model. The traditional method is to invert the additional density variations by developing Born operator with respect to both density and velocity or modify the image condition. In this work, we develop a matched-filter based LS-RTM for velocity-only Born modeling operator, which removes the artifacts in the imaging created by the strong density variation. This method doesn{\textquoteright}t call for extra work of finite difference stencil and is more general. In the experiment part, we use a complex discontinuous layered medium with strong density variations at the ocean bottom, and show the efficacy of the propose formulation.},
	keywords = {density effect, Least square, low rank, SEG},
	doi = {10.1190/segam2018-2997814.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/yang2018SEGrde/yang2018SEGrde.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/yang2018SEGrde/yang2018SEGrde_pres.pdf},
	author = {Mengmeng Yang and Rajiv Kumar and Rongrong Wang and Felix J. Herrmann}
}
@conference {yang2017SEGfsp,
	title = {Fast sparsity-promoting least-squares migration with multiples in time domain},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2017},
	note = {(SEG, Houston)},
	month = {09},
	pages = {4828-4832},
	abstract = {Based on the latest developments of research in inversion technology with optimization, researchers have made significant progress in the implementation of least-squares reverse-time migration (LS-RTM) of primaries. In Marine data however, these applications rely on the success of a pre-imaging separation of primaries and multiples, which can be modeled as a multi-dimensional convolution between the vertical derivative of the surface-free Green{\textquoteright}s function and the down-going receiver wavefield. Instead of imaging the primaries and multiples separately, we implement the LS-RTM of the total down-going wavefield by combining areal source injection and linearized Born modelling, where strong surface related multiples are generated from a strong density variation at the ocean bottom. The advantage including surface related multiples in LS-RTM is the extra illumination we obtain from these multiples without incurring additional computational costs related to carrying out multi-dimensional convolutions part of conventional multiple prediction procedures. Even though we are able to avert these computational costs, our approach shares the large costs of LSRTM. We reduce these costs by combining randomized source subsampling with our sparsity-promoting imaging technology, which produces artifact-free, high-resolution images, with the surface-related multiples migrated properly.},
	keywords = {least-squares RTM, multiples, SEG, sparsity, time domain},
	doi = {10.1190/segam2017-17741608.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2017/yang2017SEGfsp/yang2017SEGfsp.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2017/yang2017SEGfsp/yang2017SEGfsp_pres.pdf},
	author = {Mengmeng Yang and Emmanouil Daskalakis and Felix J. Herrmann}
}
@conference {yang2017SEGWStds,
	title = {Time domain sparsity promoting LSRTM with surface-related multiples in shallow-water case},
	booktitle = {SEG Workshop on Multiples: Status, Progress, Challenges and Open issues; Houston},
	year = {2017},
	note = {(SEG Workshop, Houston)},
	month = {09},
	abstract = {In the SRME relation, multiples are expressed as the multi- dimensional convolution between the the vertical derivative of the surface-free Green{\textquoteright}s function and the down-going receiver wavefield. This relation leads to the methods that separate the surface-related multiples and primaries. Instead of imaging separated multiples trivially, we introduced the SRME relation into wave equation by areal source injection, which costs nothing extra to involve multiples into the forward wavefields. The related image contains the phantoms components from cross-correlation between different-orders of events. Especially in shallow water, due to the strong magnitudes of multiples and their overlap with primaries, the artifacts contain strong phantoms not only of ocean bottom but also subsurface layer interfaces. We use sparsity-promoting inversions where the nicely curved structure of the subsurface models are detected to help cleaning up the phantoms. We reduce the costs by combin- ing randomized source subsampling with linearized Bregman method and get cleaned image with one data pass.},
	keywords = {multiple, SEG, workshop},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2017/yang2017SEGWStds/yang2017SEGWStds.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2017/yang2017SEGWStds/yang2017SEGWStds_post.pdf},
	author = {Mengmeng Yang and Felix J. Herrmann}
}
@conference {chai2016SEGlbm,
	title = {A linearized Bregman method for compressive waveform inversion},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2016},
	note = {(SEG, Dallas)},
	month = {10},
	pages = {1449-1454},
	abstract = {We present an implementation of a recently developed and relatively simple linearized Bregman method to solve the large-scale $\ell_1$-norm sparsity-promoting Gauss-Newton (GN) full-waveform inversion (FWI) problem. Numerical experiments demonstrate that: the much simpler linearized Bregman method does a comparable and even superior job compared to a state-of-the-art $\ell_1$-norm solver SPGL1, which is previously used in the modified Gauss-Newton FWI; the linearized Bregman method is also more efficient (faster) than SPGL1; the FWI result with the linearized Bregman method solving $\ell_1$-norm sparsity-promoting problems to get the model updates is better than that obtained by solving $\ell_2$-norm least-squares problems to get the model updates.},
	keywords = {Bregman method, SEG, waveform inversion},
	doi = {10.1190/segam2016-13848105.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/chai2016SEGlbm/chai2016SEGlbm.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/chai2016SEGlbm/chai2016SEGlbm_pres.pdf},
	author = {Xintao Chai and Mengmeng Yang and Philipp A. Witte and Rongrong Wang and Zhilong Fang and Felix J. Herrmann}
}
@conference {yang2016SEGtds,
	title = {Time-domain sparsity-promoting least-squares migration with source estimation},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2016},
	note = {(SEG, Dallas)},
	month = {10},
	pages = {4225-4229},
	abstract = {Traditional reverse-time migration (RTM) gives images with wrong amplitudes and low resolution. Least-squares RTM (LS-RTM) on the other hand, is capable of obtaining true-amplitude images as solutions of $\ell_2$-norm norm minimization problems by fitting the synthetic and observed reflection data. The shortcoming of this approach is that solutions of these $\ell_2$ problems are typically smoothed, tend to be overfitted, and computationally too expensive because it requires compared to standard RTM too many iterations. By working with randomized subsets of data only, the computational costs of LS-RTM can be brought down to an acceptable level while producing artifact-free high-resolution images without overfitting the data. While initial results of these "compressive imaging" methods were encouraging various open issues remain including guaranteed convergence, algorithmic complexity of the solver, and lack of on-the-fly source estimation for LS-RTMs with wave-equation solvers based on time-stepping. By including on-the-fly source-time function estimation into the method of Linearized Bregman (LB), on which we reported before, we tackle all these issues resulting in a easy-to-implement algorithm that offers flexibility in the trade-off between the number of iterations and the number of wave-equation solves per iteration for a fixed total number of wave-equation solves. Application of our algorithm on a 2D synthetic shows that we are able to obtain high-resolution images, including accurate estimates of the wavelet, for a single pass through the data. The produced image, which is by virtue of the inversion deconvolved with respect to the wavelet, is roughly of the same quality as the image obtained given the correct source function.},
	keywords = {least squares, RTM, SEG, source estimation, time domain},
	doi = {10.1190/segam2016-13850609.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/yang2016SEGtds/yang2016SEGtds.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/yang2016SEGtds/yang2016SEGtds_pres.pdf},
	author = {Mengmeng Yang and Philipp A. Witte and Zhilong Fang and Felix J. Herrmann}
}
