@mastersthesis {fang2018THsea,
	title = {Source estimation and uncertainty quantification for wave-equation based seismic imaging and inversion},
	year = {2018},
	note = {(PhD)},
	month = {04},
	school = {The University of British Columbia},
	type = {phd},
	address = {Vancouver},
	abstract = {In modern seismic exploration, wave-equation-based inversion and imaging approaches are widely employed for their potential of creating high-resolution subsurface images from seismic data by using the wave equation to describe the underlying physical model of wave propagation. Despite their successful practical applications, some key issues remain unsolved, including local minima, unknown sources, and the largely missing uncertainty analyses for the inversion. This thesis aims to address the following two aspects: to perform the inversion without prior knowledge of sources, and to quantify uncertainties in the inversion. The unknown source can hinder the success of wave-equation-based ap- proaches. A simple time shift in the source can lead to misplaced reflectors in linearized inversions or large disturbances in nonlinear problems. Unfortunately, accurate sources are typically unknown in real problems. The first major contribution of this thesis is, given the fact that the wave equation linearly depends on the sources, I have proposed on-the-fly source estimation techniques for the following wave-equation-based approaches: (1) time-domain sparsity-promoting least-squares reverse-time migration; and (2) wavefield-reconstruction inversion. Considering the linear dependence of the wave equation on the sources, I project out the sources by solving a linear least-squares problem, which enables us to conduct successful wave- equation-based inversions without prior knowledge of the sources. Wave-equation-based approaches also produce uncertainties in the resulting velocity model due to the noisy data, which would influence the subsequent exploration and financial decisions. The difficulties related to practical uncertainty quantification lie in: (1) expensive computation related to wave-equation solves, and (2) the nonlinear parameter-to-data map. The second major contribution of this thesis is the proposal of a computationally feasible Bayesian framework to analyze uncertainties in the resulting velocity models. Through relaxing the wave-equation constraints, I obtain a less nonlinear parameter-to-data map and a posterior distribution that can be adequately approximated by a Gaussian distribution. I derive an implicit formulation to construct the covariance matrix of the Gaussian distribution, which allows us to sample the Gaussian distribution in a computationally efficient manner. I demonstrate that the proposed Bayesian framework can provide adequately accurate uncertainty analyses for intermediate to large- scale problems with an acceptable computational cost.},
	keywords = {FWI, LS-RTM, PhD, source estimation, UQ, WRI},
	url = {https://slim.gatech.edu/Publications/Public/Thesis/2018/fang2018THsea/fang2018THsea.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Thesis/2018/fang2018THsea/fang2018THsea_pres.pdf},
	author = {Zhilong Fang}
}
@article {fang2017sewri,
	title = {Source estimation for wavefield-reconstruction inversion},
	journal = {Geophysics},
	volume = {83},
	number = {4},
	year = {2018},
	note = {(Geophysics)},
	pages = {R345-R359},
	abstract = {Source estimation is essential to all the wave-equation-based seismic inversions, including full-waveform inversion and the recently proposed wavefield-reconstruction inversion. When the source estimation is inaccurate, errors will propagate into the predicted data and introduce additional data misfit. As a consequence, inversion results that minimize this data misfit may become erroneous. To mitigate the errors introduced by the incorrect and pre-estimated sources, an embedded procedure that updates sources along with medium parameters is necessary for the inversion. So far, such a procedure is still missing in the context of wavefield-reconstruction inversion, a method that is, in many situations, less prone to local minima related to the so-called cycle skipping, compared to full-waveform inversion through exact data-fitting. While wavefield-reconstruction inversion indeed helps to mitigate issues related to cycle skipping by extending the search space with wavefields as auxiliary variables, it relies on having access to the correct source functions. In this paper, we remove the requirement of having the accurate source functions by proposing a source estimation technique specifically designed for wavefield-reconstruction inversion. To achieve this task, we consider the source functions as unknown variables and arrive at an objective function that depends on the medium parameters, wavefields, and source functions. During each iteration, we apply the so-called variable projection method to simultaneously project out the source functions and wavefields. After the projection, we obtain a reduced objective function that only depends on the medium parameters and invert for the unknown medium parameters by minimizing this reduced objective. Numerical experiments illustrate that this approach can produce accurate estimates of the unknown medium parameters without any prior information of the source functions.},
	keywords = {estimation, FWI, source, variable projection, WRI},
	doi = {10.1190/geo2017-0700.1},
	url = {https://slim.gatech.edu/Publications/Public/Journals/Geophysics/2018/fang2017sewri/fang2017sewri.html},
	author = {Zhilong Fang and Rongrong Wang and Felix J. Herrmann}
}
@presentation {dasilva2015SINBADFsss,
	title = {Scaling SINBAD software to 3-D on Yemoja},
	year = {2015},
	publisher = {SINBAD},
	abstract = {We present early results on the scalability of SINBAD{\textquoteright}s wavefield reconstruction and wave-equation based inversion technologies on Yemoja, a 17k core cluster made available to us by BG Group at SENAI CIMATEC Supercomputing Centre in Brazil.},
	keywords = {Presentation, SINBAD, SINBADFALL2015, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/dasilva2015SINBADFsss/dasilva2015SINBADFsss.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/dasilva2015SINBADFsss/dasilva2015SINBADFsss.mov},
	author = {Curt Da Silva and Haneet Wason and Mathias Louboutin and Bas Peters and Shashin Sharan and Zhilong Fang and Felix J. Herrmann}
}
@conference {fang2015EAGEsew,
	title = {Source estimation for Wavefield Reconstruction Inversion},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2015},
	note = {(EAGE, Madrid)},
	month = {06},
	abstract = {Wavefield reconstruction inversion is a new approach to waveform based inversion that helps overcome the {\textquoteleft}cycle skipping{\textquoteright} problem. However, like most waveform based inversion methods, wavefield reconstruction inversion also requires good source wavelets. Without correct source wavelets, wavefields cannot be reconstructed correctly and the velocity model cannot be updated correctly neither. In this work, we propose a source estimation method for wavefield reconstruction inversion based on the variable projection method. In this method, we reconstruct wavefields and estimate source wavelets simultaneously by solving an extended least-squares problem, which contains source wavelets. This approach does not increase the computational cost compared to conventional wavefield reconstruction inversion. Numerical results illustrates with our source estimation method we are able to recover source wavelets and obtain inversion results that are comparable to results obtained with true source wavelets.},
	keywords = {EAGE, source estimation, WRI},
	doi = {10.3997/2214-4609.201412588},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2015/fang2015EAGEsew/fang2015EAGEsew.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2015/fang2015EAGEsew/fang2015EAGEsew_pres.pdf},
	author = {Zhilong Fang and Felix J. Herrmann}
}
@conference {fang2015IIPFWIsoa,
	title = {Stochastic optimization and its application to seismic inversion},
	booktitle = {Inaugural Full-Waveform Inversion Workshop},
	year = {2015},
	note = {(Natal, Brazil)},
	month = {08-09},
	keywords = {FWI, inversion, Optimization, stochastic},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/IIPFWI/fang2015IIPFWIsoa/fang2015IIPFWIsoa_pres.pdf},
	author = {Zhilong Fang and Tim Burgess and Felix J. Herrmann}
}
@presentation {fang2014SINBADsew,
	title = {Source estimation for WRI and its application},
	year = {2014},
	publisher = {SINBAD},
	keywords = {Presentation, SINBAD, SINBADFALL2014, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2014/Fall/fang2014SINBADsew/fang2014SINBADsew.pdf},
	author = {Zhilong Fang and Xiang Li and Bas Peters and Felix J. Herrmann}
}
@techreport {zfang2014SEGsqn,
	title = {A stochastic quasi-Newton McMC method for uncertainty quantification of full-waveform inversion},
	number = {TR-EOAS-2014-6},
	year = {2014},
	month = {04},
	institution = {UBC},
	abstract = {In this work we propose a stochastic quasi-Newton Markov chain Monte Carlo (McMC) method to quantify the uncertainty of full-waveform inversion (FWI). We formulate the uncertainty quantification problem in the framework of the Bayesian inference, which formulates the posterior probability as the conditional probability of the model given the observed data. The Metropolis-Hasting algorithm is used to generate samples satisfying the posterior probability density function (pdf) to quantify the uncertainty. However it suffers from the challenge to construct a proposal distribution that simultaneously provides a good representation of the true posterior pdf and is easy to manipulate. To address this challenge, we propose a stochastic quasi-Newton McMC method, which relies on the fact that the Hessian of the deterministic problem is equivalent to the inverse of the covariance matrix of the posterior pdf. The l-BFGS (limited-memory Broyden{\textendash}Fletcher{\textendash}Goldfarb{\textendash}Shanno) Hessian is used to approximate the inverse of the covariance matrix efficiently, and the randomized source sub-sampling strategy is used to reduce the computational cost of evaluating the posterior pdf and constructing the l-BFGS Hessian. Numerical experiments show the capability of this stochastic quasi-Newton McMC method to quantify the uncertainty of FWI with a considerable low cost.},
	keywords = {FWI, McMC, quasi-Newton, Uncertainty quantification},
	url = {https://slim.gatech.edu/Publications/Public/TechReport/2014/zfang2014SEGsqn/zfang2014SEGsqn.html},
	author = {Zhilong Fang and Felix J. Herrmann}
}
@presentation {fang2014SINBADsqn,
	title = {A stochastic quasi-Newton McMC method for uncertainty quantification of full-waveform inversion},
	year = {2014},
	publisher = {SINBAD},
	abstract = {In this work, we present a fast McMC method using the stochastic l-BFGS Hessian to quantify the uncertainty of full-waveform inversion. Using the stochastic l-BFGS Hessian, we do not need the assumption that the Hessian of data misfit is low rank and we also reduce the computational cost of estimating the Hessian. Numerical result shows the capability of this fast McMC method.},
	keywords = {Presentation, SINBAD, SINBADSPRING2014, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2014/Spring/fang2014SINBADsqn/fang2014SINBADsqn.pdf},
	author = {Zhilong Fang and Chia Ying Lee and Felix J. Herrmann}
}
@presentation {fang2013SINBADsfwi,
	title = {Swift FWI},
	year = {2013},
	publisher = {SINBAD},
	abstract = {In 3D case, there is much more data and modeling is much more expensive. As a result, parallel computing is very important for 3D full-waveform inversion. Both domain decomposition and data decomposition need a large number of parallel computing resources. However, programs based on parallel MATLAB suffer from the limitation of licenses. In order to obtain a MATLAB licenses free solution, we use SWIFT, which is a fast and easy parallel scripting language. Once the original Mat file is complied to an executable file, SWIFT can run the code inside the executable file in parallel without using parallel MATLAB. We use the SWIFT to compute the object functions and gradients of different shots in parallel, and test the parallel 3D FWI code with overthrust data. This is joint work with Thomas Lai, Harsh Juneja, Bas Peters.},
	keywords = {Presentation, SINBAD, SINBADFALL2013, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2013/Fall/fang2013SINBADsfwi/fang2013SINBADsfwi.pdf},
	author = {Zhilong Fang and Henryk Modzelewski and Tristan van Leeuwen and Thomas Lai and Harsh Juneja and Bas Peters and Felix J. Herrmann}
}
