@article {yang2020tdsp,
	title = {Time-domain sparsity promoting least-squares reverse time migration with source estimation},
	journal = {Geophysical Prospecting},
	volume = {68},
	number = {9},
	year = {2020},
	note = {(Geophysical Prospecting)},
	month = {08},
	pages = {2697-2711},
	abstract = {Least-squares reverse time migration is well-known for its capability to generate artifact-free true-amplitude subsurface images through fitting observed data in the least-squares sense. However, when applied to realistic imaging problems, this approach is faced with issues related to overfitting and excessive computational costs induced by many wave-equation solves. The fact that the source function is unknown complicates this situation even further. Motivated by recent results in stochastic optimization and transform-domain sparsity-promotion, we demonstrate that the computational costs of inversion can be reduced significantly while avoiding imaging artifacts and restoring amplitudes. While powerfull, these new approaches do require accurate information on the source-time function, which is often lacking. Without this information, the imaging quality deteriorates rapidly. We address this issue by presenting an approach where the source-time function is estimated on the fly through a technique known as variable projection. Aside from introducing negligible computational overhead, the proposed method is shown to perform well on imaging problems with noisy data and problems that involve complex settings such as salt. In either case, the presented method produces high resolution high-amplitude fidelity images including an estimates for the source-time function. In addition, due to its use of stochastic optimization, we arrive at these images at roughly one to two times the cost of conventional reverse time migration involving all data.},
	keywords = {penalty, source estimation, sparsity inversion},
	doi = {10.1111/1365-2478.13021},
	url = {https://slim.gatech.edu/Publications/Public/Journals/GeophysicalProspecting/2020/yang2020tdsp/yang2020tdsp.html},
	author = {Mengmeng Yang and Zhilong Fang and Philipp A. Witte and Felix J. Herrmann}
}
@presentation {witte2016SINBADFtdl,
	title = {Time-domain least-squares RTM with sparsity promotion on field data},
	year = {2016},
	publisher = {SINBAD},
	abstract = {Least squares reverse time migration (LSRTM) is an inversion based imaging algorithm which can surpress acquisition related artifacts and provides images with increased frequency content, decreased noise level and balanced amplitudes. In this work demonstrate our time-domain LSRTM workflow using various pre-conditioners, source-subsampling and sparsity promotion and show its application to the 2D Machar field data set.},
	keywords = {Presentation, SINBAD, SINBADFALL2016, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/witte2016SINBADFtdl/witte2016SINBADFtdl.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/witte2016SINBADFtdl/witte2016SINBADFtdl.mov},
	author = {Philipp A. Witte and Felix J. Herrmann}
}
@presentation {yang2016SINBADFtds,
	title = {Time-domain sparsity-promoting least-squares migration with source estimation},
	year = {2016},
	publisher = {SINBAD},
	abstract = {Compared to traditional reverse-time migration (RTM), least-squares RTM (LS_RTM) is able to obtain true amplitude images as solutions of $\ell_2$-norm minimization problems by fitting the synthetic and observed reflection data. The shortcoming is that solutions of these $\ell_2$ problems tend to be overfitted and computationally too expensive. By working with randomized subsets of data only, the computational costs of LS-RTM can be brought down to an acceptable level, producing artifact-free high-resolution images. By including on-the-fly source-time function estimation into the method of Linearized Bregman (LB), we tackle the open issues of these "compressive imaging" in the aspects of algorithmic complexity of solver, guaranteed convergence and source estimation. We also inbvestigate whether the algorithm can be accelerated when we combine LB with the Nesterov method. Application of our algorithm on a 2D synthetic shows that we are able to get high-resolution images, with accurate estimates of the wavelet, for one single data pass.},
	keywords = {Presentation, SINBAD, SINBADFALL2016, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/yang2016SINBADFtds/yang2016SINBADFtds.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/yang2016SINBADFtds/yang2016SINBADFtds.m4v},
	author = {Mengmeng Yang and Philipp A. Witte and Zhilong Fang and Felix J. Herrmann}
}
@conference {yang2016SEGtds,
	title = {Time-domain sparsity-promoting least-squares migration with source estimation},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2016},
	note = {(SEG, Dallas)},
	month = {10},
	pages = {4225-4229},
	abstract = {Traditional reverse-time migration (RTM) gives images with wrong amplitudes and low resolution. Least-squares RTM (LS-RTM) on the other hand, is capable of obtaining true-amplitude images as solutions of $\ell_2$-norm norm minimization problems by fitting the synthetic and observed reflection data. The shortcoming of this approach is that solutions of these $\ell_2$ problems are typically smoothed, tend to be overfitted, and computationally too expensive because it requires compared to standard RTM too many iterations. By working with randomized subsets of data only, the computational costs of LS-RTM can be brought down to an acceptable level while producing artifact-free high-resolution images without overfitting the data. While initial results of these "compressive imaging" methods were encouraging various open issues remain including guaranteed convergence, algorithmic complexity of the solver, and lack of on-the-fly source estimation for LS-RTMs with wave-equation solvers based on time-stepping. By including on-the-fly source-time function estimation into the method of Linearized Bregman (LB), on which we reported before, we tackle all these issues resulting in a easy-to-implement algorithm that offers flexibility in the trade-off between the number of iterations and the number of wave-equation solves per iteration for a fixed total number of wave-equation solves. Application of our algorithm on a 2D synthetic shows that we are able to obtain high-resolution images, including accurate estimates of the wavelet, for a single pass through the data. The produced image, which is by virtue of the inversion deconvolved with respect to the wavelet, is roughly of the same quality as the image obtained given the correct source function.},
	keywords = {least squares, RTM, SEG, source estimation, time domain},
	doi = {10.1190/segam2016-13850609.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/yang2016SEGtds/yang2016SEGtds.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/yang2016SEGtds/yang2016SEGtds_pres.pdf},
	author = {Mengmeng Yang and Philipp A. Witte and Zhilong Fang and Felix J. Herrmann}
}
@presentation {witte2015SINBADFtdf,
	title = {Time-domain FWI in TTI media},
	year = {2015},
	publisher = {SINBAD},
	abstract = {We develop an inversion workflow for tilted transverse isotropic (TTI) media using a purely acoustic formulation of the wave equation. The anisotropic modeling kernel is used for the forward modeling operator, as well as for the adjoint Jacobian to back propagate the data residual, thus providing the true gradient of the FWI objective function. We apply this workflow on a synthetic FWI example and perform RTM on a field data set. Furthermore, we discuss alternatives for the pseudo-spectral Laplacian operator of the current implementation.},
	keywords = {Presentation, SINBAD, SINBADFALL2015, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/witte2015SINBADFtdf/witte2015SINBADFtdf.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/witte2015SINBADFtdf/witte2015SINBADFtdf.mov},
	author = {Philipp A. Witte and Felix J. Herrmann}
}
@conference {witte2015IIPFWItdf,
	title = {Time-domain FWI in TTI media},
	booktitle = {Inaugural Full-Waveform Inversion Workshop},
	year = {2015},
	note = {(Natal, Brazil)},
	month = {08-09},
	abstract = {We develop an inversion workflow for tilted transverse isotropic (TTI) media using a purely acoustic formulation of the wave equation. The anisotropic modeling kernel is used for the forward modeling operator, as well as for the adjoint Jacobian to back propagate the data residual, thus providing the true gradient of the FWI objective function.},
	keywords = {FWI, time domain, TTI},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/IIPFWI/witte2015IIPFWItdf/witte2015IIPFWItdf_pres.pdf},
	author = {Philipp A. Witte and Mathias Louboutin and Felix J. Herrmann}
}
