@article {lopez2020gsb,
	title = {Spectral Gap-Based Seismic Survey Design},
	journal = {IEEE Transactions on Geoscience and Remote Sensing},
	year = {2023},
	month = {1},
	abstract = {Seismic imaging in challenging sedimentary basins and reservoirs requires acquiring, processing, and imaging very large volumes of data (tens of terabytes). To reduce the cost of acquisition and the time from acquiring the data to producing a subsurface image, novel acquisition systems based on compressive sensing, low-rank matrix recovery, and randomized sampling have been developed and implemented. These approaches allow practitioners to achieve dense wavefield reconstruction from a substantially reduced number of field samples. However, designing acquisition surveys suited for this new sampling paradigm remains a critical and challenging role in oil, gas, and geothermal exploration. Typical random designs studied in the low-rank matrix recovery and compressive sensing literature are difficult to achieve by standard industry hardware. For practical purposes, a compromise between stochastic and realizable samples is needed. In this paper, we propose a deterministic and computationally cheap tool to alleviate randomized acquisition design, prior to survey deployment and large-scale optimization. We consider universal and deterministic matrix completion results in the context of seismology, where a bipartite graph representation of the source-receiver layout allows for the respective spectral gap to act as a quality metric for wavefield reconstruction. We provide realistic scenarios to demonstrate the utility of the spectral gap as a flexible tool that can be incorporated into existing survey design workflows for successful seismic data acquisition via low-rank and sparse signal recovery.},
	keywords = {biadjacency matrix, bipartite graph, Compressive Sensing, IEEE, low rank matrix completion, nuclear norm minimization, seismic data, seismic trace interpolation, spectral gap},
	doi = {10.1109/TGRS.2023.3237464},
	url = {https://slim.gatech.edu/Publications/Public/Journals/IEEETGRS/2023/lopez2020gsb/lopez2020gsb.pdf},
	author = {Oscar Lopez and Rajiv Kumar and Nick Moldoveanu and Felix J. Herrmann}
}
@conference {zhang2022SEGass,
	title = {A simulation-free seismic survey design by maximizing the spectral gap},
	booktitle = {International Meeting for Applied Geoscience and Energy Expanded Abstracts},
	year = {2022},
	note = {(IMAGE, Houston)},
	month = {05},
	abstract = {Due to the tremendous cost of seismic data acquisition, methods have been developed to reduce the amount of data acquired by designing optimal missing trace reconstruction algorithms. These technologies are designed to record as little data as possible in the field, while providing accurate wavefield reconstruction in the areas of the survey that are not recorded. This is achieved by designing randomized subsampling masks that allow for accurate wavefield reconstruction via matrix completion methods. Motivated by these recent results, we propose a simulation-free seismic survey design that aims at improving the quality of a given randomized subsampling using a simulated annealing algorithm that iteratively increases the spectral gap of the subsampling mask, a property recently linked to the quality of the reconstruction. We demonstrate that our proposed method improves the data reconstruction quality for a fixed subsampling rate on a realistic synthetic dataset.},
	keywords = {Acquisition, matrix factorization, SEG, spectral gap, survey design, wavefield reconstruction},
	doi = {10.1190/image2022-3751690.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2022/zhang2022SEGass/Yijun2022SEGass.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2022/zhang2022SEGass/index.html},
	software = {https://github.com/slimgroup/opt_spectral_gap},
	author = {Yijun Zhang and Mathias Louboutin and Ali Siahkoohi and Ziyi Yin and Rajiv Kumar and Felix J. Herrmann}
}
@conference {siahkoohi2018EAGEsdr,
	title = {Seismic data reconstruction with Generative Adversarial Networks},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2018},
	note = {(EAGE, Copenhagen)},
	month = {06},
	abstract = {A main challenge in seismic imaging is acquiring densely sampled data. Compressed Sensing has provided theoretical foundations upon which desired sampling rate can be achieved by applying a sparsity promoting algorithm on sub-sampled data. The key point in successful recovery is to deploy a randomized sampling scheme. In this paper, we propose a novel deep learning-based method for fast and accurate reconstruction of heavily under-sampled seismic data, regardless of type of sampling. A neural network learns to do reconstruction directly from data via an adversarial process. Once trained, the reconstruction can be done by just feeding the frequency slice with missing data into the neural network. This adaptive nonlinear model makes the algorithm extremely flexible, applicable to data with arbitrarily type of sampling. With the assumption that we have access to training data, the quality of reconstructed slice is superior even for extremely low sampling rate (as low as 10\%) due to the data-driven nature of the method.},
	keywords = {data reconstruction, EAGE, generative adversarial networks, machine learning},
	doi = {10.3997/2214-4609.201801393},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2018/siahkoohi2018EAGEsdr/siahkoohi2018EAGEsdr.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2018/siahkoohi2018EAGEsdr/siahkoohi2018EAGEsdr_pres.pdf},
	author = {Ali Siahkoohi and Rajiv Kumar and Felix J. Herrmann}
}
@conference {alfaraj2018SEGswi,
	title = {Seismic waveform inversion using decomposed one-way wavefields},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2018},
	note = {(SEG, Anaheim)},
	month = {10},
	pages = {1379-1383},
	abstract = {Conventional seismic full waveform inversion (FWI) estimates a velocity model by matching the two-way predicted data with the observed data. The non-linearity of the problem and the complexity of the Earth{\textquoteright}s subsurface, which results in complex wave propagation may lead to unsatisfactory inversion results. Moreover, having inaccurate overburden models, i.e water velocity model in the ocean bottom acquisition setting, may lead to erroneous velocity models. In order to obtain better velocity models, we simplify the FWI problem by decomposing the total two-way observed and predicted wavefields into one-way wavefields at the receiver locations using acoustic wavefield decomposition. We then propose to fit the less-complex one-way wavefield to obtain a velocity model that contains valuable information about the overburden. We use this inverted velocity model as a better initial model for the inversion using the other more-complex one-way wavefield. We demonstrate our proposed algorithm on acoustic non-inverse crime synthetic data produced from the Marmousi2 model. The proposed method provides improved inversion results compared with conventional FWI due to properly accounting for separate model updates from the up- and down-going wavefields.},
	keywords = {decomposition, FWI, one-way, SEG},
	doi = {10.1190/segam2018-2998162.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/alfaraj2018SEGswi/alfaraj2018SEGswi.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/alfaraj2018SEGswi/alfaraj2018SEGswi_pres.pdf},
	author = {Ali M. Alfaraj and Rajiv Kumar and Felix J. Herrmann}
}
@article {liu2018ssi,
	title = {Simultaneous-shot inversion for PDE-constrained optimization problems with missing data},
	journal = {Inverse Problems},
	volume = {35},
	number = {2},
	year = {2018},
	note = {(Inverse Problems)},
	pages = {025003},
	abstract = {Stochastic optimization is key to efficient inversion in PDE-constrained optimization. Using {\textquoteleft}simultaneous shots{\textquoteright}, or random superposition of source terms, works very well in simple acquisition geometries where all sources see all receivers, but this rarely occurs in practice. We develop an approach that interpolates data to an ideal acquisition geometry while solving the inverse problem using simultaneous shots. The approach is formulated as a joint inverse problem, combining ideas from low-rank interpolation with full-waveform inversion. Results using synthetic experiments illustrate the flexibility and efficiency of the approach.},
	keywords = {Full-waveform inversion, low-rank interpolation, Optimization},
	doi = {10.1088/1361-6420/aaf317},
	url = {https://slim.gatech.edu/Publications/Public/Journals/InverseProblems/2018/liu2018ssi/liu2018ssi.pdf},
	author = {Michelle Liu and Rajiv Kumar and Eldad Haber and Aleksandr Y. Aravkin}
}
@conference {sharan2018IEEEIUSspoa,
	title = {Sparsity-promoting photoacoustic imaging with source estimation},
	booktitle = {2018 IEEE International Ultrasonics Symposium (IUS)},
	year = {2018},
	note = {(IEEE IUS, Kobe)},
	month = {10},
	pages = {206-212},
	abstract = {Photoacoustics has emerged as a high-contrast imaging modality that provides optical absorption maps inside of tissues, therefore complementing morphological information of conventional ultrasound. The laser-generated photoacoustic waves are usually envelope-detected, thus disregarding the specific waveforms generated by each photoabsorber. Here we propose a sparsity-promoting image reconstruction method that allows the estimation of each photoabsorber{\textquoteright}s source-time function. Preliminary studies showed the ability to reconstruct the optical absorption map of an in silico vessel phantom. By using a sparsity-promoting imaging method, absorption maps and source-time functions can still be recovered even in situations where the number of transducers is decreased by a factor of six. Moreover, the recovery is able to attain higher resolution than conventional beamforming methods. Because our method recovers the source-time function of the absorbers, it could potentially also be used to distinguish different types of photoabsorbers, or the degree of aggregation of exogenous agents, under the assumption that these would generate different source-time functions at the moment of laser irradiation.},
	keywords = {Acceleration, estimation, IEEE, Image reconstruction, Phantoms, photoacoustic imaging, source-time function, sparsity promoting inversion, Transducers, wave equation},
	doi = {10.1109/ULTSYM.2018.8580037},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/IEEEIUS/2018/sharan2018IEEEIUSspoa/sharan2018IEEEIUSspoa.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/IEEEIUS/2018/sharan2018IEEEIUSspoa/sharan2018IEEEIUSspoa_pres.pdf},
	author = {Shashin Sharan and Rajiv Kumar and Diego S. Dumani and Mathias Louboutin and Rongrong Wang and Stanislav Emelianov and Felix J. Herrmann}
}
@conference {alfaraj2017EAGEswr,
	title = {Shear wave reconstruction from low cost randomized acquisition},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2017},
	note = {(EAGE, Paris)},
	month = {06},
	abstract = {Shear waves travel in the subsurface at a lower speed compared with compressional waves. Therefore, much finer spatial sampling is required to properly record the shear waves. This leads to higher acquisition costs which are typically avoided by designing surveys geared towards only compressional waves imaging. We propose using randomly under-sampled ocean bottom acquisition for recording both compressional and shear waves. The recorded multicomponent data is then interpolated using an SVD-free low rank interpolation scheme that is feasible for large scale seismic data volumes to obtain finely sampled data. Following that, we perform elastic wavefield decomposition at the ocean bottom to recover accurate up- and dow-going S-waves. Synthetic data results indicate that using randomized under-sampled acquisition, we can recover accurate S-waves with an economical cost compared with conventional acquisition designs.},
	keywords = {EAGE, interpolation, randomized acquisition, rank minimization, shear waves},
	doi = {10.3997/2214-4609.201700594},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2017/alfaraj2017EAGEswr/alfaraj2017EAGEswr.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2017/alfaraj2017EAGEswr/alfaraj2017EAGEswr_pres.pdf},
	author = {Ali M. Alfaraj and Rajiv Kumar and Felix J. Herrmann}
}
@presentation {wason2015SINBADFsss,
	title = {Source separation for simultaneous towed-streamer acquisition via compressed sensing},
	year = {2015},
	publisher = {SINBAD},
	abstract = {We show a comparison between two compressed-sensing based source-separation algorithms, i.e., sparsity promotion and rank minimization, for simultaneous data.},
	keywords = {Presentation, SINBAD, SINBADFALL2015, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/wason2015SINBADFsss/wason2015SINBADFsss.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/wason2015SINBADFsss/wason2015SINBADFsss.mov},
	author = {Haneet Wason and Rajiv Kumar and Felix J. Herrmann}
}
@article {kumar2015sss,
	title = {Source separation for simultaneous towed-streamer marine acquisition {\textendash}- a compressed sensing approach},
	journal = {Geophysics},
	volume = {80},
	number = {6},
	year = {2015},
	note = {(Geophysics)},
	month = {11},
	pages = {WD73-WD88},
	abstract = {Simultaneous marine acquisition is an economic way to sample seismic data and speed up acquisition, wherein single or multiple source vessels fire sources at near-simultaneous or slightly random times, resulting in overlapping shot records. The current paradigm for simultaneous towed-streamer marine acquisition incorporates {\textquotedblleft}low variability{\textquotedblright} in source firing times, i.e., 0 <= 1 or 2 s because the sources and receivers are moving. This results in a low degree of randomness in simultaneous data, which is challenging to separate (into its constituent sources) using compressed-sensing-based separation techniques because randomization is key to successful recovery via compressed sensing. We have addressed the challenge of source separation for simultaneous towed-streamer acquisitions via two compressed-sensing-based approaches, i.e., sparsity promotion and rank minimization. We have evaluated the performance of the sparsity-promotion- and rank-minimization-based techniques by simulating two simultaneous towed-streamer acquisition scenarios, i.e., over/under and simultaneous long offset. A field data example from the Gulf of Suez for the over/under acquisition scenario was also developed. We observed that the proposed approaches gave good and comparable recovery qualities of the separated sources, but the rank-minimization technique outperformed the sparsity-promoting technique in terms of the computational time and memory. We also compared these two techniques with the normal-moveout-based median-filtering-type approach, which had comparable results.},
	keywords = {2D, Acquisition, inversion, marine, Optimization, Rank, source separation, sparsity},
	doi = {10.1190/geo2015-0108.1},
	url = {https://slim.gatech.edu/Publications/Public/Journals/Geophysics/2015/kumar2015sss/kumar2015sss_revised.pdf},
	url2 = {http://library.seg.org/doi/abs/10.1190/geo2015-0108.1},
	author = {Rajiv Kumar and Haneet Wason and Felix J. Herrmann}
}
@conference {lopez2015SEGWSsfm,
	title = {SVD-free matrix completion in randomized marine acquisition},
	booktitle = {SEG Workshop on Rank-Reduction and Other Sparse Transform Methods with Application to Data Reconstruction, De-Noising, De-Blending and Imaging; New Orleans},
	year = {2015},
	note = {(SEG, New Orleans)},
	month = {10},
	abstract = {During this presentation, we will illustrate how insights from matrix-free matrix completion can be used to solve problems in (on- and off-the-grid) missing trace interpolation and time-jittered (simultaneous) marine acquisition. In particular, we will demonstrate the importance of data organization to favor recovery by rank minimization and the use of deterministic spectral properties to predict the recovery. We also make make comparisons between wavefield reconstructions based on transform-domain sparsity promotion and matrix completion.},
	keywords = {Acquisition, interpolation, matrix completion, rank reduction, SEG, workshop},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2015/lopez2015SEGWSsfm/lopez2015SEGWSsfm_pres.pdf},
	author = {Oscar Lopez and Haneet Wason and Curt Da Silva and Rajiv Kumar and Felix J. Herrmann}
}
@conference {wason2014SEGsss,
	title = {Source separation via SVD-free rank minimization in the hierarchical semi-separable representation},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2014},
	note = {(SEG)},
	month = {10},
	pages = {120-126},
	abstract = {Recent developments in matrix rank optimization have allowed for new computational approaches in the field of source separation or deblending. In this paper, we propose a source separation algorithm for blended marine acquisition, where two sources are deployed at different depths (over/under acquisition). The separation method incorporates the Hierarchical Semi-Separable structure (HSS) inside rank-regularized least-squares formulations. The proposed approach is suitable for large scale problems, since it avoids SVD computations and uses a low-rank factorized formulation instead. We illustrate the performance of the new HSS-based deblending approach by simulating an over/under blended acquisition, wherein uniformly random time delays (of < 1 second) are applied to one of the sources.},
	keywords = {Acquisition, deblending, HSS, marine, Rank, SEG, source separation},
	doi = {http://dx.doi.org/10.1190/segam2014-1583.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2014/wason2014SEGsss/wason2014SEGsss.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2014/wason2014SEGsss/wason2014SEGsss_pres.pdf},
	author = {Haneet Wason and Rajiv Kumar and Aleksandr Y. Aravkin and Felix J. Herrmann}
}
@presentation {wason2014SINBADsss,
	title = {Source separation via SVD-free rank-minimization in the hierarchical semi-separable representation},
	year = {2014},
	publisher = {SINBAD},
	abstract = {During this talk, we will show a source separation algorithm for blended marine acquisition, where two sources are deployed at different depths (over/under acquisition). The separation method incorporates the Hierarchical Semi-Separable (HSS) structure inside rank-regularized least-squares formulations. We also compare this deblending scheme with the sparsity-promoting one-norm minimization scheme.},
	keywords = {Presentation, SINBAD, SINBADFALL2014, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2014/Fall/wason2014SINBADsss/wason2014SINBADsss.pdf},
	author = {Haneet Wason and Rajiv Kumar and Felix J. Herrmann}
}
@presentation {tu2014SINBADsis,
	title = {Sparse inversion simplified},
	year = {2014},
	publisher = {SINBAD},
	abstract = {Implementation of the SPGl1 solver in low-level computer languages such as C or Fortran may sound daunting to many. This talk is tailored for you if you would like to reap benefits from using sparse constraints to regularize your inversion problem, and at the same time want some easy-to-implement algorithm to solve it. We discuss in this talk the linearized Bregman projection method that embraces both ingredients, and show promising applications in fast least-squares imaging and seismic data interpolation problems.},
	keywords = {Presentation, SINBAD, SINBADFALL2014, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2014/Fall/tu2014SINBADsis/tu2014SINBADsis.pdf},
	author = {Ning Tu and Navid Ghadermarzy and Rajiv Kumar and Felix J. Herrmann}
}
@conference {kumar2014EAGErank,
	title = {SVD-free low-rank matrix factorization : wavefield reconstruction via jittered subsampling and reciprocity},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2014},
	month = {06},
	abstract = {Recently computationally efficient rank optimization techniques have been studied extensively to develop a new mathematical tool for the seismic data interpolation. So far, matrix completion problems have been discussed where sources are subsample according to a discrete uniform distribution. In this paper, we studied the effect of two different subsampling techniques on seismic data interpolation using rank-regularized formulations, namely jittered subsampling over uniform random subsampling. The other objective of this paper is to combine the fact of source-receiver reciprocity with the rank-minimization techniques to enhance the accuracy of missing-trace interpolation. We illustrate the advantages of jittered subsampling and reciprocity using a seismic line from Gulf of Suez to obtain high quality results for interpolation, a key application in exploration geophysics.},
	keywords = {EAGE, interpolation, low-rank, reciprocity},
	doi = {10.3997/2214-4609.20141394},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2014/kumar2014EAGErank/kumar2014EAGErank.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2014/kumar2014EAGErank/kumar2014EAGErank_pres.pdf},
	author = {Rajiv Kumar and Aleksandr Y. Aravkin and Ernie Esser and Hassan Mansour and Felix J. Herrmann}
}
@presentation {kumar2014SINBADsfm,
	title = {SVD-free matrix completion for seismic data reconstruction},
	year = {2014},
	publisher = {SINBAD},
	abstract = {Seismic data interpolation via rank-minimization techniques has been recently introduced in the seismic community. All the existing rank-minimization techniques assumes the underlying grid to be regular. Irregularity is one of the common impediments in acquisition. In this work, we studied the effect of irregularity on structured and show that how we can modify the existing techniques to handle it. Other then irregularity, we often have missing data. We also show that we can tackle both regularization and interpolation issue simultaneously. The objective of this work is to extend our existing method of interpolation on structured grid to unstructured grid. We illustrate the advantages of the modification in existing methodology using a seismic line from Gulf of Suez to obtain high quality results for regularization and interpolation, a key application in exploration geophysics.},
	keywords = {Presentation, SINBAD, SINBADSPRING2014, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2014/Spring/kumar2014SINBADsfm/kumar2014SINBADsfm.pdf},
	author = {Rajiv Kumar and Oscar Lopez and Ernie Esser and Felix J. Herrmann}
}
@conference {kumar2013EAGEsind,
	title = {Seismic data interpolation and denoising using SVD-free low-rank matrix factorization},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2013},
	month = {06},
	abstract = {Recent developments in rank optimization have allowed new approaches for seismic data interpolation and denoising. In this paper, we propose an approach for simultaneous seismic data interpolation and denoising using robust rank-regularized formulations. The proposed approach is suitable for large scale problems, since it avoids SVD computations by using factorized formulations. We illustrate the advantages of the new approach using a seismic line from Gulf of Suez and 5D synthetic seismic data to obtain high quality results for interpolation and denoising, a key application in exploration geophysics.},
	keywords = {denoising, EAGE, interpolation},
	doi = {10.3997/2214-4609.20130388},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/kumar2013EAGEsind/kumar2013EAGEsind.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/kumar2013EAGEsind/kumar2013EAGEsind_pres.pdf},
	author = {Rajiv Kumar and Aleksandr Y. Aravkin and Hassan Mansour and Ben Recht and Felix J. Herrmann}
}
@presentation {kumar2013SINBADhss,
	title = {Seismic data interpolation via low-rank matrix factorization in the hierarchical semi-separable representation},
	year = {2013},
	publisher = {SINBAD},
	abstract = {Recent developments in matrix rank optimization have allowed for new computational approaches in the field of seismic data interpolation. One of the main requirements of exploiting rank-minimization approaches is that the target data set should exhibit a low-rank structure. Seismic frequency slices exhibit low-rank structure at the low-frequencies, but not at the high frequencies. This behavior is due to the increase in oscillations as we move from low to high-frequency slices, even though the energy remains focused around the diagonal. Therefore, interpolation via rank minimization in the high-frequency range requires extended formulations that incorporate low-rank structure. We propose an approach for seismic data interpolation which incorporates the Hierarchical Semi-Separable Structure (HSS) inside rank-regularized least-squares formulations for the missing-trace interpolation problem. The proposed approach is suitable for large scale problems, since it avoids SVD computations and uses a low-rank factorized formulation instead. We illustrate the advantages of the new HSS approach by interpolating a seismic line from the Gulf of Suez and compare the reconstruction with conventional rank minimization.},
	keywords = {Presentation, SINBAD, SINBADSPRING2013, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2013/Spring/kumar2013SINBADhss/kumar2013SINBADhss.pdf},
	author = {Rajiv Kumar and Hassan Mansour and Aleksandr Y. Aravkin and Felix J. Herrmann}
}
@techreport {kumar2013ICMLlr,
	title = {An SVD-free Pareto curve approach to rank minimization},
	number = {TR-EOAS-2013-2},
	year = {2013},
	month = {02},
	institution = {UBC},
	abstract = {Recent SVD-free matrix factorization formulations have enabled rank optimization for extremely large-scale systems (millions of rows and columns). In this paper, we consider rank-regularized formulations that only require a target data-fitting error level, and propose an algorithm for the corresponding problem. We illustrate the advantages of the new approach using the Netflix problem, and use it to obtain high quality results for seismic trace interpolation, a key application in exploration geophysics. We show that factor rank can be easily adjusted as the inversion proceeds, and propose a weighted extension that allows known subspace information to improve the results of matrix completion formulations. Using these methods, we obtain high-quality reconstructions for large scale seismic interpolation problems with real data.},
	keywords = {interpolation, low rank},
	url = {https://slim.gatech.edu/Publications/Public/TechReport/2013/kumar2013ICMLlr/kumar2013ICMLlr.pdf},
	author = {Aleksandr Y. Aravkin and Rajiv Kumar and Hassan Mansour and Ben Recht and Felix J. Herrmann}
}
@presentation {kumar2012SINBADsdi,
	title = {Seismic data interpolation using SVD free Pareto curve based low rank optimization},
	year = {2012},
	publisher = {SINBAD},
	abstract = {Seismic data acquisition is cursed by missing data caused by physical and/or budget constraints. Aim of interpolation technique is to spatially transform irregularly acquired data to regularly sampled data while maintaining the events coherency. While transform-domain sparsity promotion has proven to be an effective tool to solve this recovery problem, recent developments in Rank penalizing techniques opens new horizon to improved recovery by exploiting low-rank structure. A major downside of current state of the art techniques is their reliance on the SVD of seismic data structures, which can be prohibitively expensive. Fortunately, recent work allows us to circumvent this problem by working with matrix factorizations. We review a novel approach to rank penalization, and successfully apply it to the seismic interpolation problem by exploiting the low-rank structure of seismic data. Experiments for the recovery of 2D and 3D acquisition support the feasibility and potential of the new approach.},
	keywords = {Presentation, SINBAD, SINBADFALL2012, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2012/Fall/kumar2012SINBADsdi/kumar2012SINBADsdi_pres.pdf},
	author = {Rajiv Kumar}
}
