@conference {zhang2022SEGass,
	title = {A simulation-free seismic survey design by maximizing the spectral gap},
	booktitle = {International Meeting for Applied Geoscience and Energy Expanded Abstracts},
	year = {2022},
	note = {(IMAGE, Houston)},
	month = {05},
	abstract = {Due to the tremendous cost of seismic data acquisition, methods have been developed to reduce the amount of data acquired by designing optimal missing trace reconstruction algorithms. These technologies are designed to record as little data as possible in the field, while providing accurate wavefield reconstruction in the areas of the survey that are not recorded. This is achieved by designing randomized subsampling masks that allow for accurate wavefield reconstruction via matrix completion methods. Motivated by these recent results, we propose a simulation-free seismic survey design that aims at improving the quality of a given randomized subsampling using a simulated annealing algorithm that iteratively increases the spectral gap of the subsampling mask, a property recently linked to the quality of the reconstruction. We demonstrate that our proposed method improves the data reconstruction quality for a fixed subsampling rate on a realistic synthetic dataset.},
	keywords = {Acquisition, matrix factorization, SEG, spectral gap, survey design, wavefield reconstruction},
	doi = {10.1190/image2022-3751690.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2022/zhang2022SEGass/Yijun2022SEGass.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2022/zhang2022SEGass/index.html},
	software = {https://github.com/slimgroup/opt_spectral_gap},
	author = {Yijun Zhang and Mathias Louboutin and Ali Siahkoohi and Ziyi Yin and Rajiv Kumar and Felix J. Herrmann}
}
@conference {kumar2021SEGeuq,
	title = {Enabling uncertainty quantification for seismic data pre-processing using normalizing flows (NF){\textemdash}an interpolation example},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2021},
	note = {(IMAGE, Denver)},
	month = {09},
	pages = {1515-1519},
	abstract = {Seismic data go through a sequence of pre-processing steps before being made into an image. Although some work has been done to assess the uncertainties in the final images, how the uncertainty in the pre-processing affects the results remains largely unexplored. We use Normalizing Flows (NF), a type of deep neural network, to interpolate seismic data and quantify the associated uncertainty. A big advantage of NFs, over the more commonly used Markov Chain Monte Carlo methods, is that they can successfully sample a complex and high-dimensional probability space with fewer assumptions. We present the first application of NF in interpolating (synthetic) seismic data. The statistical measurements retrieved from the network can be used to better characterize the data as it is passed to the post-processing phase.},
	keywords = {deep learning, normalizing flow, SEG, wavefield reconstruction},
	doi = {10.1190/segam2021-3583705.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2021/kumar2021SEGeuq/kumar2021SEGeuq.pdf},
	software = {https://github.com/slimgroup/Software.SEG2021},
	author = {Rajiv Kumar and Maria Kotsi and Ali Siahkoohi and Alison Malcolm}
}
@conference {siahkoohi2019SEGdlb,
	title = {Deep-learning based ocean bottom seismic wavefield recovery},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2019},
	note = {(SEG, San Antonio)},
	month = {09},
	pages = {2232-2237},
	abstract = {Ocean bottom surveys usually suffer from having very sparse receivers. Assuming a desirable source sampling, achievable by existing methods such as (simultaneous-source) randomized marine acquisition, we propose a deep-learning based scheme to bring the receivers to the same spatial grid as sources using a convolutional neural network. By exploiting source-receiver reciprocity, we construct training pairs by artificially subsampling the fully-sampled single-receiver frequency slices using a random training mask and later, we deploy the trained neural network to fill-in the gaps in single-source frequency slices. Our experiments show that a random training mask is essential for successful wavefield recovery, even when receivers are on a periodic gird. No external training data is required and experiments on a 3D synthetic data set demonstrate that we are able to recover receivers for up to 90 \% missing receivers, missing either randomly or periodically, with a better recovery for random case, at low to midrange frequencies.},
	keywords = {machine learning, obn, reciprocity, reconstruction, SEG},
	doi = {10.1190/segam2019-3216632.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2019/siahkoohi2019SEGdlb/siahkoohi2019SEGdlb.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2019/siahkoohi2019SEGdlb/siahkoohi2019SEGdlb_pres.pdf},
	author = {Ali Siahkoohi and Rajiv Kumar and Felix J. Herrmann}
}
@conference {yang2019SEGlrr,
	title = {Low-rank representation of subsurface extended image volumes with power iterations},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2019},
	note = {(SEG, San Antonio)},
	month = {09},
	pages = {4470-4474},
	abstract = {Full subsurface extended image volumes (EIVs) contain abundant information such as subsurface image gathers used in imaging, interpretation of rock properties or velocity analysis, but are expensive in term of computational cost and storage requirement due to their large size. Yet, due to their redundant information, monochromatic EIVs exhibit a low-rank structure that allows us to get a good approximation at a computational cost proportional to the rank k , while conventional techniques require at least the number of sources. Such low-rank factorized EIVs are computed thanks to the randomized singular values decomposition (SVD) algorithm. However, recent developments on low-rank approximations of EIVs raise two major questions. First, monochromatic EIVs rely on time-harmonic wave equation solvers, which do not scale well to realistic 3D models. Second, the rank of the monochromatic EIVs increases with the frequency, which yields increasing computational costs and storage. Here, we propose a construction approach based on a time-domain finite-difference wave-equation solver with time stepping, which is combined to power iteration schemes in the randomized SVD algorithm to accelerate the decay of the singular values. We compare the performances of simultaneous iterations, block-Krylov iterations and the original randomized SVD on the computation of the EIV for a small section of the Marmousi model. Then, we show further results on the full Marmousi model to validate our approach.},
	keywords = {full extended image volumes, power iterations, randomized SVD, SEG, time domain},
	doi = {10.1190/segam2019-3215961.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2019/yang2019SEGlrr/yang2019SEGlrr.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2019/yang2019SEGlrr/yang2019SEGlrr_pres.pdf},
	author = {Mengmeng Yang and Marie Graff and Rajiv Kumar and Felix J. Herrmann}
}
@conference {moldoveanu2018SEGcsbdl,
	title = {Compressive sensing based design for land and OBS surveys: The noise issue},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2018},
	note = {(SEG, Anaheim)},
	month = {10},
	pages = {102-106},
	abstract = {Two important developments in seismic acquisition in the last decade were introduction of simultaneous shooting and reconstruction via inversion of the complete seismic wavefield. As the seismic wavefield is typically under sampled in at least one of the four spatial coordinates, both developments could contribute to improve the sampling and, in addition, to increase acquisition efficiency. Herein, we look at the impact of seismic noise when simultaneous shooting and seismic wavefield reconstruction are implemented for a land or ocean bottom seismic survey.},
	keywords = {SEG},
	doi = {10.1190/segam2018-2997759.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/moldoveanu2018SEGcsbdl/moldoveanu2018SEGcsbdl.pdf},
	author = {Nick Moldoveanu and Philip Bilsby and John Quigley and Rajiv Kumar and Felix J. Herrmann}
}
@conference {sharan2018SEGada,
	title = {A debiasing approach to microseismic},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2018},
	note = {(SEG, Anaheim)},
	month = {10},
	pages = {2942-2946},
	abstract = {Microseismic data is often used to locate fracture locations and their origin in time created by fracking. Although surface microseismic data can have large apertures and is easier to acquire than the borehole data, it often suffers from poor signal to noise ratio (S/R). Poor S/R poses a challenge in terms of estimating the correct location and source-time function of a microseismic source. In this work, we propose a denoising step in combination with a computationally cheap debiasing based approach to locate microseismic sources and to estimate their source-time functions with correct amplitude from extremely noisy data. Through numerical experiments, we demonstrate that our method can work with closely spaced microseismic sources with source-time functions of different peak amplitudes and frequencies. We have also shown the ability of our method with the smooth velocity model.},
	keywords = {Full-waveform inversion, Imaging, microseismic, noise, SEG, wave equation},
	doi = {10.1190/segam2018-2997252.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/sharan2018SEGada/sharan2018SEGada.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/sharan2018SEGada/sharan2018SEGada_pres.pdf},
	author = {Shashin Sharan and Rajiv Kumar and Rongrong Wang and Felix J. Herrmann}
}
@conference {siahkoohi2018SEGcnn,
	title = {Deep Convolutional Neural Networks in prestack seismic{\textendash}-two exploratory examples},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2018},
	note = {(SEG, Anaheim)},
	month = {10},
	pages = {2196-2200},
	abstract = {Deep convolutional neural networks are having quite an impact and have resulted in step changes in the capabilities of image and voice recognition systems and there are indications they may have a similar impact on post-stack seismic images. While these developments are certainly important, we are after all dealing with an imaging problem involving an unknown earth and not completely understood physics. When the imaging step itself is not handled properly, this may possibly offset gains offered by deep learning. Motivated by our work on deep convolutional neural networks in seismic data reconstruction, we discuss how generative networks can be employed in prestack problems ranging from the relatively mondane removal of the effects of the free surface to dealing with the complex effects of numerical dispersion in time-domain finite differences. While the results we present are preliminary, there are strong indications that generative deep convolutional neural networks can have a major impact on complex tasks in prestack seismic data processing and modeling for inversion.},
	keywords = {Dispersion, machine learning, Modeling, Processing, SEG, SRME},
	doi = {10.1190/segam2018-2998599.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/siahkoohi2018SEGcnn/siahkoohi2018SEGcnn.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/siahkoohi2018SEGcnn/siahkoohi2018SEGcnn_pres.pdf},
	author = {Ali Siahkoohi and Mathias Louboutin and Rajiv Kumar and Felix J. Herrmann}
}
@conference {kadu2018SEGMSFWI,
	title = {Full-waveform inversion with Mumford-Shah regularization},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2018},
	note = {(SEG, Anaheim)},
	month = {10},
	pages = {1258-1262},
	abstract = {Full-waveform inversion (FWI) is a non-linear procedure to es- timate subsurface rock parameters from surface measurements of induced seismic waves. This procedure is ill-posed in nature and hence, requires regularization to enhance some structure depending on the prior information. Recently, Total-variation (TV) regularization has gained popularity due to its ability to produce blocky structures. Contrary to this, the earth behave more like a piecewise smooth function. TV regularization fails to enforce this prior information into FWI. We propose a Mumford-Shah functional to incorporate the piecewise smooth spatial structure in the FWI procedure. The resulting opti- mization problem is solved by a splitting method. We show the improvement in results against TV regularization on two synthetic camembert examples.},
	keywords = {FWI, Mumford-Shah, regularization, SEG},
	doi = {10.1190/segam2018-2997224.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/kadu2018SEGMSFWI/kadu2018SEGMSFWI.pdf},
	author = {Ajinkya Kadu and Rajiv Kumar and Tristan van Leeuwen}
}
@conference {kumar2018SEGlreiv,
	title = {Low-rank representation of extended image volumes{\textendash}{\textendash}applications to imaging and velocity continuation},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2018},
	note = {(SEG, Anaheim)},
	month = {10},
	pages = {4418-4422},
	abstract = {In this paper, we present a cost-effective low-rank factorized form of computing the full subsurface extended image volumes without explicitly calculating the receiver wavefields. The propose approach is computationally feasible, which exploits the low-rank structure of full subsurface extended image volumes organized as a matrix, thus avoiding the customary loop over sources. Using carefully selected stylized examples, we show how conventional migration images can be extracted from the low-rank factorized form. We also present a velocity continuation procedure that uses the same low-rank form and allows us to map the extended image for one velocity model to another velocity model without recomputing all the source wavefields.},
	keywords = {image volume, low-rank, SEG, velocity continuation},
	doi = {10.1190/segam2018-2998404.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/kumar2018SEGlreiv/kumar2018SEGlreiv.html},
	author = {Rajiv Kumar and Marie Graff-Kray and Tristan van Leeuwen and Felix J. Herrmann}
}
@conference {yang2018SEGrde,
	title = {Removing density effects in LS-RTM with a low-rank matched filter},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2018},
	note = {(SEG, Anaheim)},
	month = {10},
	pages = {4251-4255},
	abstract = {Least-squares reverse-time migration faces difficulties when it inverts the data containing strong components related to density variation with velocity-only Born modeling operator. The strong density perturbation will be inverted as strong dummy velocity perturbations, which influence the amplitudes and phase of the velocity perturbations in the inverted model. The traditional method is to invert the additional density variations by developing Born operator with respect to both density and velocity or modify the image condition. In this work, we develop a matched-filter based LS-RTM for velocity-only Born modeling operator, which removes the artifacts in the imaging created by the strong density variation. This method doesn{\textquoteright}t call for extra work of finite difference stencil and is more general. In the experiment part, we use a complex discontinuous layered medium with strong density variations at the ocean bottom, and show the efficacy of the propose formulation.},
	keywords = {density effect, Least square, low rank, SEG},
	doi = {10.1190/segam2018-2997814.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/yang2018SEGrde/yang2018SEGrde.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/yang2018SEGrde/yang2018SEGrde_pres.pdf},
	author = {Mengmeng Yang and Rajiv Kumar and Rongrong Wang and Felix J. Herrmann}
}
@conference {alfaraj2018SEGswi,
	title = {Seismic waveform inversion using decomposed one-way wavefields},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2018},
	note = {(SEG, Anaheim)},
	month = {10},
	pages = {1379-1383},
	abstract = {Conventional seismic full waveform inversion (FWI) estimates a velocity model by matching the two-way predicted data with the observed data. The non-linearity of the problem and the complexity of the Earth{\textquoteright}s subsurface, which results in complex wave propagation may lead to unsatisfactory inversion results. Moreover, having inaccurate overburden models, i.e water velocity model in the ocean bottom acquisition setting, may lead to erroneous velocity models. In order to obtain better velocity models, we simplify the FWI problem by decomposing the total two-way observed and predicted wavefields into one-way wavefields at the receiver locations using acoustic wavefield decomposition. We then propose to fit the less-complex one-way wavefield to obtain a velocity model that contains valuable information about the overburden. We use this inverted velocity model as a better initial model for the inversion using the other more-complex one-way wavefield. We demonstrate our proposed algorithm on acoustic non-inverse crime synthetic data produced from the Marmousi2 model. The proposed method provides improved inversion results compared with conventional FWI due to properly accounting for separate model updates from the up- and down-going wavefields.},
	keywords = {decomposition, FWI, one-way, SEG},
	doi = {10.1190/segam2018-2998162.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/alfaraj2018SEGswi/alfaraj2018SEGswi.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2018/alfaraj2018SEGswi/alfaraj2018SEGswi_pres.pdf},
	author = {Ali M. Alfaraj and Rajiv Kumar and Felix J. Herrmann}
}
@conference {zhang2017SEGmsd,
	title = {Massive 3D seismic data compression and inversion with hierarchical Tucker},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2017},
	note = {(SEG, Houston)},
	month = {09},
	pages = {1347-1352},
	abstract = {Modern-day oil and gas exploration, especially in areas of complex geology such as fault belts and sub-salt areas, is an increasingly expensive and risky endeavour. Typically long-offset and dense sampling seismic data are required for subsequent shot based processing procedures, e.g. wave-equation based inversion (WEI) and surface-related multiple elimination (SRME). However, these strict requirements result in an exponential growth in data volume size and prohibitive demands on computational resources, given the multidimensional nature of the data volumes. Moreover the physical constraints and cost limitations impose restrictions on acquiring fully sampled data. In this work, we propose to invert our large-scale data from a set of subsampled measurements, resulting in an estimate of the true volume in a compressed low-rank tensor format. Rather than expanding the data to its fully-sampled form for later downstream processes, we demonstrate how to use this compressed data directly via on-the-fly common shot or receiver gathers extraction. The combination of massive compression and fast on demand data reconstruction of 3D shot or receiver gathers leads to a substantial reduction in memory costs but with minimal effects on results in the subsequent processing procedures. We demonstrate the effective implementation of our proposed framework on full-waveform inversion on a 3D seismic synthetic data set generated from a Overthrust model.},
	keywords = {3D, FWI, SEG, tensor algebra},
	doi = {10.1190/segam2017-17742951.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2017/zhang2017SEGmsd/zhang2017SEGmsd.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2017/zhang2017SEGmsd/zhang2017SEGmsd_pres.pdf},
	author = {Yiming Zhang and Curt Da Silva and Rajiv Kumar and Felix J. Herrmann}
}
@conference {alfaraj2017SEGrsw,
	title = {Reconstruction of S-waves from low-cost randomized and simultaneous acquisition by joint sparse inversion},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2017},
	note = {(SEG, Houston)},
	month = {09},
	pages = {2533-2538},
	abstract = {Spatial Nyquist sampling rate, which is proportional to the apparent subsurface velocity, is the key deciding cost factor for conventional seismic acquisition. Due to the lower shear wave velocity compared with compressional waves, finer spatial sampling is required to properly record the earlier, which increases the acquisition costs. This is one of the reasons why shear waves are usually not considered in practice. To avoid having the Nyquist criterion as the deciding cost factor and to utilize multicomponent data to its available full extent, we propose acquiring randomly undersampled ocean bottom seismic data. Each component can then be interpolated separately, followed by elastic decomposition to recover up- and down-going S-waves. Instead, we jointly interpolate and decompose the recorded multicomponent data by solving one sparsity promoting optimization problem. This way we ensure that the relative amplitudes of the multicomponent data is preserved. We compare two sparsifying transforms: the curvelet transform and the frequency-wavenumber transform. Another key cost deciding factor for seismic acquisition is the efficiency of acquiring data. This calls for simultaneous acquisition, which requires a source separation step. Similarly, instead of taking a two-step approach, we perform a sparsity-promoting joint source separation decomposition. Results on economically and efficiently acquired synthetic data of both joint methods show their ability of reconstructing accurate up- and down-going S-waves.},
	keywords = {decomposition, elastic, interpolation, randomized acquisition, SEG, shear wave, source separation, sparse},
	doi = {10.1190/segam2017-17681376.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2017/alfaraj2017SEGrsw/alfaraj2017SEGrsw.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2017/alfaraj2017SEGrsw/alfaraj2017SEGrsw_pres.pdf},
	author = {Ali M. Alfaraj and Rajiv Kumar and Felix J. Herrmann}
}
@conference {herrmann2016SEGWSctl,
	title = {Compressive time-lapse marine acquisition},
	booktitle = {SEG Workshop on Low cost geophysics: How to be creative in a cost-challenged environment; Dallas},
	year = {2016},
	note = {(SEG Workshop, Dallas)},
	month = {10},
	keywords = {Acquisition, SEG, workshop},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/herrmann2016SEGWSctl/herrmann2016SEGWSctl_pres.pdf},
	author = {Felix J. Herrmann and Rajiv Kumar and Felix Oghenekohwo and Shashin Sharan and Haneet Wason}
}
@conference {kumar2016SEGtjm,
	title = {Time-jittered marine acquisition{\textendash}-a rank-minimization approach for 5D source separation},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2016},
	note = {(SEG, Dallas)},
	month = {10},
	pages = {119-123},
	abstract = {Simultaneous source marine acquisition has been recognized as an economic way of improving spatial sampling and speedup acquisition time, where a single- (or multiple-) source vessel fires at jittered source locations and time instances. Consequently, the acquired simultaneous data volume is processed to separate the overlapping shot records resulting in densely sampled data volume. It has been shown in the past that the simultaneous source acquisition design and source separation process can be setup as a compressed sensing problem, where conventional seismic data is reconstructed from simultaneous data via a sparsity-promoting optimization formulation. While the recovery quality of separated data is reasonably well, the recovery process can be computationally expensive due to transform-domain redundancy. In this paper, we present a computationally tractable rank-minimization algorithm to separate simultaneous data volumes. The proposed algorithm is suitable for large-scale seismic data, since it avoids singular-value decompositions and uses a low-rank based factorized formulation instead. Results are illustrated for simulations of simultaneous time-jittered continuous recording for a 3D ocean-bottom cable survey.},
	keywords = {5D, marine, SEG, source separation, time-jittered acquisition},
	doi = {10.1190/segam2016-13878249.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/kumar2016SEGtjm/kumar2016SEGtjm.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2016/kumar2016SEGtjm/kumar2016SEGtjm_pres.pdf},
	author = {Rajiv Kumar and Shashin Sharan and Haneet Wason and Felix J. Herrmann}
}
@conference {lopez2015SEGWSsfm,
	title = {SVD-free matrix completion in randomized marine acquisition},
	booktitle = {SEG Workshop on Rank-Reduction and Other Sparse Transform Methods with Application to Data Reconstruction, De-Noising, De-Blending and Imaging; New Orleans},
	year = {2015},
	note = {(SEG, New Orleans)},
	month = {10},
	abstract = {During this presentation, we will illustrate how insights from matrix-free matrix completion can be used to solve problems in (on- and off-the-grid) missing trace interpolation and time-jittered (simultaneous) marine acquisition. In particular, we will demonstrate the importance of data organization to favor recovery by rank minimization and the use of deterministic spectral properties to predict the recovery. We also make make comparisons between wavefield reconstructions based on transform-domain sparsity promotion and matrix completion.},
	keywords = {Acquisition, interpolation, matrix completion, rank reduction, SEG, workshop},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2015/lopez2015SEGWSsfm/lopez2015SEGWSsfm_pres.pdf},
	author = {Oscar Lopez and Haneet Wason and Curt Da Silva and Rajiv Kumar and Felix J. Herrmann}
}
@conference {oghenekohwo2014SEGrsw,
	title = {Randomized sampling without repetition in time-lapse surveys},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2014},
	note = {(SEG)},
	month = {10},
	pages = {4848-4852},
	abstract = {Vouching for higher levels of repeatability in acquisition and processing of time-lapse (4D) seismic data has become the standard with oil and gas contractor companies, with significant investment in the design of acquisition systems and processing algorithms that attempt to address some of the current 4D challenges, in particular, imaging weak 4D signals. Recent developments from the field of compressive sensing have shown the benefits of variants of randomized sampling in marine seismic acquisition and its impact for the future of seismic exploration. Following these developments, we show that the requirement for accurate survey repetition in time-lapse seismic data acquisition can be waived provided we solve a sparsity-promoting convex optimization program that makes use of the shared component between the baseline and monitor data. By setting up a framework for inversion of the stacked sections of a time-lapse data, given the pre-stack data volumes, we are able to extract 4D signals with relatively highfidelity from significant subsamplings. Our formulation is applied to time-lapse data that has been acquired with different source/receiver geometries, paving the way for an efficient approach to dealing with time-lapse data acquired with initially poor repeatability levels, provided the survey geometry details are known afterwards.},
	keywords = {4D, Acquisition, random, repetition, SEG, time-lapse},
	doi = {http://dx.doi.org/10.1190/segam2014-1627.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2014/oghenekohwo2014SEGrsw/oghenekohwo2014SEGrsw.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2014/oghenekohwo2014SEGrsw/oghenekohwo2014SEGrsw_pres.pdf},
	author = {Felix Oghenekohwo and Rajiv Kumar and Felix J. Herrmann}
}
@conference {wason2014SEGsss,
	title = {Source separation via SVD-free rank minimization in the hierarchical semi-separable representation},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2014},
	note = {(SEG)},
	month = {10},
	pages = {120-126},
	abstract = {Recent developments in matrix rank optimization have allowed for new computational approaches in the field of source separation or deblending. In this paper, we propose a source separation algorithm for blended marine acquisition, where two sources are deployed at different depths (over/under acquisition). The separation method incorporates the Hierarchical Semi-Separable structure (HSS) inside rank-regularized least-squares formulations. The proposed approach is suitable for large scale problems, since it avoids SVD computations and uses a low-rank factorized formulation instead. We illustrate the performance of the new HSS-based deblending approach by simulating an over/under blended acquisition, wherein uniformly random time delays (of < 1 second) are applied to one of the sources.},
	keywords = {Acquisition, deblending, HSS, marine, Rank, SEG, source separation},
	doi = {http://dx.doi.org/10.1190/segam2014-1583.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2014/wason2014SEGsss/wason2014SEGsss.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2014/wason2014SEGsss/wason2014SEGsss_pres.pdf},
	author = {Haneet Wason and Rajiv Kumar and Aleksandr Y. Aravkin and Felix J. Herrmann}
}
@conference {kumar2013SEGAVA,
	title = {AVA analysis and geological dip estimation via two-way wave-equation based extended images},
	booktitle = {SEG Technical Program Expanded Abstracts},
	volume = {32},
	year = {2013},
	month = {09},
	pages = {423-427},
	abstract = {In this paper, we present an efficient way to compute extended images for all subsurface offsets without explicitly calculating the source and receiver wavefields for all the sources. Because the extended images contain all possible subsurface offsets, we compute the angle-domain image gathers by selecting the subsurface offset that is aligned with the local dip. We also propose a method to compute the local dip information directly from common-image-point gathers. To assess the quality of the angle-domain common-image-points gathers we compute the angle-dependent reflectivity coefficients and compare them with theoretical reflectivity coefficients yielded by the (linearized) Zoeppritz equations for a few synthetic models.},
	keywords = {AVA, dip, extended images, SEG, wave-equation},
	doi = {10.1190/segam2013-1348.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2013/kumar2013SEGAVA/kumar2013SEGAVA.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2013/kumar2013SEGAVA/kumar2013SEGAVA_pres.pdf},
	author = {Rajiv Kumar and Tristan van Leeuwen and Felix J. Herrmann}
}
@conference {kumar2013SEGMVA,
	title = {Efficient WEMVA using extended images},
	booktitle = {SEG Workshop on Advances in Model Building, Imaging, and FWI; Houston},
	year = {2013},
	month = {09},
	abstract = {Image gathers as a function of subsurface offset are an important tool for velocity analysis in areas of complex geology. Here, we offer a new perspective on image gathers by organizing the extended image as a function of all subsurface offsets and all subsurface points in to a matrix whose (i,j)th entry captures the interaction between gridpoints i and j. For even small problems, it is infeasible to form and store this matrix. Instead, we propose an efficient algorithm to glean information from the image volume via efficient matrix-vector products. We illustrate how this can be used to construct objective functions for automated MVA.},
	keywords = {inversion, MVA, poster, SEG, workshop},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2013/kumar2013SEGMVA/kumar2013SEGMVA_poster.pdf},
	author = {Rajiv Kumar and Tristan van Leeuwen and Felix J. Herrmann}
}
@conference {kumar2013SEGHSS,
	title = {Reconstruction of seismic wavefields via low-rank matrix factorization in the hierarchical-separable matrix representation},
	booktitle = {SEG Technical Program Expanded Abstracts},
	volume = {32},
	year = {2013},
	month = {09},
	pages = {3628-3633},
	abstract = {Recent developments in matrix rank optimization have allowed for new computational approaches in the field of seismic data interpolation. In this paper, we propose an approach for seismic data interpolation which incorporates the Hierarchical Semi-Separable Structure (HSS) inside rank-regularized least-squares formulations for the missing-trace interpolation problem. The proposed approach is suitable for large scale problems, since it avoids SVD computations and uses a low-rank factorized formulation instead. We illustrate the advantages of the new HSS approach by interpolating a seismic line from the Gulf of Suez and compare the reconstruction with conventional rank minimization.},
	keywords = {HSS, interpolation, SEG},
	doi = {10.1190/segam2013-1165.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2013/kumar2013SEGHSS/kumar2013SEGHSS.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2013/kumar2013SEGHSS/kumar2013SEGHSS_pres.pdf},
	author = {Rajiv Kumar and Hassan Mansour and Aleksandr Y. Aravkin and Felix J. Herrmann}
}
@conference {herrmann2012SEGfwi,
	title = {FWI from the West Coasts: lessons learned from "Gulf of Mexico Imaging Challenges: What Can Full Waveform Inversion Achieve?"},
	booktitle = {SEG Workshop on FWI; Las Vegas},
	year = {2012},
	publisher = {SEG},
	organization = {SEG},
	keywords = {FWI, SEG, workshop},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2012/herrmann2012SEGfwi/herrmann2012SEGfwi_pres.pdf},
	author = {Andrew J. Calvert and Ian Hanlon and Mostafa Javanmehri and Rajiv Kumar and Tristan van Leeuwen and Xiang Li and Brendan R. Smithyman and Eric Takam Takougang and Haneet Wason and Felix J. Herrmann}
}
