@article {zhang2023otl,
	title = {Optimized time-lapse acquisition design via spectral gap ratio minimization},
	journal = {Geophysics},
	volume = {88},
	number = {4},
	year = {2023},
	note = {(Geophysics)},
	month = {07},
	pages = {A19-A23},
	abstract = {Modern-day reservoir management and monitoring of geological carbon storage increasingly call for costly time-lapse seismic data collection. In this letter, we show how techniques from graph theory can be used to optimize acquisition geometries for low-cost sparse 4D seismic. Based on midpoint-offset domain connectivity arguments, the proposed algorithm automatically produces sparse non-replicated time-lapse acquisition geometries that favor wavefield recovery.},
	keywords = {Acquisition, JRM, matrix factorization, spectral gap, survey design, time-lapse, wavefield reconstruction},
	doi = {10.1190/geo2023-0024.1},
	url = {https://slim.gatech.edu/Publications/Public/Journals/Geophysics/2023/zhang2023otl/Spectral_Gap_Paper.html},
	author = {Yijun Zhang and Ziyi Yin and Oscar Lopez and Ali Siahkoohi and Mathias Louboutin and Rajiv Kumar and Felix J. Herrmann}
}
@presentation {zhang2022ML4SEISMICtss,
	title = {Time-lapse seismic survey design by maximizing the spectral gap},
	year = {2022},
	month = {11},
	abstract = {While time-lapse seismic has been applied successfully to CO2 sequestration monitoring, it remains a challenging problem since replicated dense surveys come at a very high cost in the field. Wavefield reconstruction based on matrix completion (MC) from randomized subsampled data is an efficient way to reduce operational costs. This technique allows for accurate time-lapse reconstruction by employing the joint recovery model (JRM), which capitalizes on the fact that different vintages share a common component. However, combining JRM with optimal time-lapse acquisition survey design remains an unexplored area of research. In expander graph theory, spectral gap (SG) reveals the source-receiver layout connectivity and is related to reconstruction quality during MC. Building on these insights, we proposed a simulation free time-lapse survey design based on JRM that aims to get similar reconstructed quality without insisting on replicate surveys, which significantly reduces the cost in the field. This approach uses the simulated annealing algorithm to find subsampling masks for each vintage. Numerical experiments confirm a direct correlation between increased spectral gap and promising time-lapse reconstruction quality.},
	keywords = {Acquisition, JRM, matrix factorization, ML4SEISMIC, SLIM, spectral gap, survey design, time-lapse, wavefield reconstruction},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/ML4SEISMIC/2022/zhang2022ML4SEISMICtss/index.html},
	author = {Yijun Zhang and Mathias Louboutin and Ali Siahkoohi and Ziyi Yin and Rajiv Kumar and Oscar Lopez and Felix J. Herrmann}
}
@conference {oghenekohwo2015EAGEuci,
	title = {Using common information in compressive time-lapse full-waveform inversion},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2015},
	note = {(EAGE, Madrid)},
	month = {06},
	abstract = {The use of time-lapse seismic data to monitor changes in the subsurface has become standard practice in industry. In addition, full-waveform inversion has also been extended to time-lapse seismic to obtain useful time-lapse information. The computational cost of this method are becoming more pronounced as the volume of data increases. Therefore, it is necessary to develop fast inversion algorithms that can also give improved time-lapse results. Rather than following existing joint inversion algorithms, we are motivated by a joint recovery model which exploits the common information among the baseline and monitor data. We propose a joint inversion framework, leveraging ideas from distributed compressive sensing and the modified Gauss-Newton method for full-waveform inversion, by using the shared information in the time-lapse data. Our results on a realistic synthetic example highlight the benefits of our joint inversion approach over a parallel inversion method that does not exploit the shared information. Preliminary results also indicate that our formulation can address time-lapse data with inconsistent acquisition geometries.},
	keywords = {EAGE, FWI, time-lapse},
	doi = {10.3997/2214-4609.201413086},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2015/oghenekohwo2015EAGEuci/oghenekohwo2015EAGEuci.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2015/oghenekohwo2015EAGEuci/oghenekohwo2015EAGEuci_poster.pdf},
	author = {Felix Oghenekohwo and Rajiv Kumar and Ernie Esser and Felix J. Herrmann}
}
@conference {oghenekohwo2014SEGrsw,
	title = {Randomized sampling without repetition in time-lapse surveys},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2014},
	note = {(SEG)},
	month = {10},
	pages = {4848-4852},
	abstract = {Vouching for higher levels of repeatability in acquisition and processing of time-lapse (4D) seismic data has become the standard with oil and gas contractor companies, with significant investment in the design of acquisition systems and processing algorithms that attempt to address some of the current 4D challenges, in particular, imaging weak 4D signals. Recent developments from the field of compressive sensing have shown the benefits of variants of randomized sampling in marine seismic acquisition and its impact for the future of seismic exploration. Following these developments, we show that the requirement for accurate survey repetition in time-lapse seismic data acquisition can be waived provided we solve a sparsity-promoting convex optimization program that makes use of the shared component between the baseline and monitor data. By setting up a framework for inversion of the stacked sections of a time-lapse data, given the pre-stack data volumes, we are able to extract 4D signals with relatively highfidelity from significant subsamplings. Our formulation is applied to time-lapse data that has been acquired with different source/receiver geometries, paving the way for an efficient approach to dealing with time-lapse data acquired with initially poor repeatability levels, provided the survey geometry details are known afterwards.},
	keywords = {4D, Acquisition, random, repetition, SEG, time-lapse},
	doi = {http://dx.doi.org/10.1190/segam2014-1627.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2014/oghenekohwo2014SEGrsw/oghenekohwo2014SEGrsw.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2014/oghenekohwo2014SEGrsw/oghenekohwo2014SEGrsw_pres.pdf},
	author = {Felix Oghenekohwo and Rajiv Kumar and Felix J. Herrmann}
}
