@conference {alfaraj2017SEGrsw,
	title = {Reconstruction of S-waves from low-cost randomized and simultaneous acquisition by joint sparse inversion},
	booktitle = {SEG Technical Program Expanded Abstracts},
	year = {2017},
	note = {(SEG, Houston)},
	month = {09},
	pages = {2533-2538},
	abstract = {Spatial Nyquist sampling rate, which is proportional to the apparent subsurface velocity, is the key deciding cost factor for conventional seismic acquisition. Due to the lower shear wave velocity compared with compressional waves, finer spatial sampling is required to properly record the earlier, which increases the acquisition costs. This is one of the reasons why shear waves are usually not considered in practice. To avoid having the Nyquist criterion as the deciding cost factor and to utilize multicomponent data to its available full extent, we propose acquiring randomly undersampled ocean bottom seismic data. Each component can then be interpolated separately, followed by elastic decomposition to recover up- and down-going S-waves. Instead, we jointly interpolate and decompose the recorded multicomponent data by solving one sparsity promoting optimization problem. This way we ensure that the relative amplitudes of the multicomponent data is preserved. We compare two sparsifying transforms: the curvelet transform and the frequency-wavenumber transform. Another key cost deciding factor for seismic acquisition is the efficiency of acquiring data. This calls for simultaneous acquisition, which requires a source separation step. Similarly, instead of taking a two-step approach, we perform a sparsity-promoting joint source separation decomposition. Results on economically and efficiently acquired synthetic data of both joint methods show their ability of reconstructing accurate up- and down-going S-waves.},
	keywords = {decomposition, elastic, interpolation, randomized acquisition, SEG, shear wave, source separation, sparse},
	doi = {10.1190/segam2017-17681376.1},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2017/alfaraj2017SEGrsw/alfaraj2017SEGrsw.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2017/alfaraj2017SEGrsw/alfaraj2017SEGrsw_pres.pdf},
	author = {Ali M. Alfaraj and Rajiv Kumar and Felix J. Herrmann}
}
@conference {alfaraj2017EAGEswr,
	title = {Shear wave reconstruction from low cost randomized acquisition},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2017},
	note = {(EAGE, Paris)},
	month = {06},
	abstract = {Shear waves travel in the subsurface at a lower speed compared with compressional waves. Therefore, much finer spatial sampling is required to properly record the shear waves. This leads to higher acquisition costs which are typically avoided by designing surveys geared towards only compressional waves imaging. We propose using randomly under-sampled ocean bottom acquisition for recording both compressional and shear waves. The recorded multicomponent data is then interpolated using an SVD-free low rank interpolation scheme that is feasible for large scale seismic data volumes to obtain finely sampled data. Following that, we perform elastic wavefield decomposition at the ocean bottom to recover accurate up- and dow-going S-waves. Synthetic data results indicate that using randomized under-sampled acquisition, we can recover accurate S-waves with an economical cost compared with conventional acquisition designs.},
	keywords = {EAGE, interpolation, randomized acquisition, rank minimization, shear waves},
	doi = {10.3997/2214-4609.201700594},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2017/alfaraj2017EAGEswr/alfaraj2017EAGEswr.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2017/alfaraj2017EAGEswr/alfaraj2017EAGEswr_pres.pdf},
	author = {Ali M. Alfaraj and Rajiv Kumar and Felix J. Herrmann}
}
