@article {herrmann2008GEOPacd,
	title = {Adaptive curvelet-domain primary-multiple separation},
	journal = {Geophysics},
	volume = {73},
	number = {3},
	year = {2008},
	month = {08},
	pages = {A17-A21},
	publisher = {SEG},
	abstract = {In many exploration areas, successful separation of primaries and multiples greatly determines the quality of seismic imaging. Despite major advances made by surface-related multiple elimination (SRME), amplitude errors in the predicted multiples remain a problem. When these errors vary for each type of multiple in different ways (as a function of offset, time, and dip), they pose a serious challenge for conventional least-squares matching and for the recently introduced separation by curvelet-domain thresholding. We propose a data-adaptive method that corrects amplitude errors, which vary smoothly as a function of location, scale (frequency band), and angle. With this method, the amplitudes can be corrected by an elementwise curvelet-domain scaling of the predicted multiples. We show that this scaling leads to successful estimation of primaries, despite amplitude, sign, timing, and phase errors in the predicted multiples. Our results on synthetic and real data show distinct improvements over conventional least-squares matching in terms of better suppression of multiple energy and high-frequency clutter and better recovery of estimated primaries. \copyright2008 Society of Exploration Geophysicists},
	keywords = {Geophysics, Processing, SLIM},
	doi = {10.1190/1.2904986},
	url = {https://slim.gatech.edu/Publications/Public/Journals/Geophysics/2008/herrmann08GEOacd/herrmann08GEOacd.pdf},
	author = {Felix J. Herrmann and Deli Wang and D. J. Verschuur}
}
@conference {verschuur2007SEGmmp,
	title = {Multiterm multiple prediction using separated reflections and diffractions combined with curvelet-based subtraction},
	booktitle = {SEG Technical Program Expanded Abstracts},
	volume = {26},
	year = {2007},
	pages = {2535-2539},
	publisher = {SEG},
	organization = {SEG},
	abstract = {The surface-related multiple elimination (SRME) method has proven to be successful on a large number of data cases. Most of the applications are still 2D, as the full 3D implementation is still expensive and under development. However, the earth is a 3D medium, such that 3D effects are difficult to avoid. Most of the 3D effects come from diffractive structures, whereas the specular reflections normally have less of a 3D behavior. By separating the seismic data in a specular reflecting and a diffractive part, multiple prediction can be carried out with these different subsets of the input data, resulting in several categories of predicted multiples. Because each category of predicted multiples can be subtracted from the input data with different adaptation filters, a more flexible SRME procedure is obtained. Based on some initial results from a Gulf of Mexico dataset, the potential of this approach is investigated. \copyright2007 Society of Exploration Geophysicists},
	keywords = {Presentation, SEG, SLIM},
	doi = {10.1190/1.2792993},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2007/verschuur07SEGmmp/verschuur07SEGmmp.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2007/verschuur07SEGmmp/verschuur07SEGmmp_pres.pdf},
	author = {D. J. Verschuur and Deli Wang and Felix J. Herrmann}
}
@article {herrmann2007GJInlp,
	title = {Non-linear primary-multiple separation with directional curvelet frames},
	journal = {Geophysical Journal International},
	volume = {170},
	number = {2},
	year = {2007},
	month = {08},
	pages = {781-799},
	abstract = {Predictive multiple suppression methods consist of two main steps: a prediction step, during which multiples are predicted from seismic data, and a primary-multiple separation step, during which the predicted multiples are {\textquoteright}matched{\textquoteright} with the true multiples in the data and subsequently removed. This second separation step, which we will call the estimation step, is crucial in practice: an incorrect separation will cause residual multiple energy in the result or may lead to a distortion of the primaries, or both. To reduce these adverse effects, a new transformed-domain method is proposed where primaries and multiples are separated rather than matched. This separation is carried out on the basis of differences in the multiscale and multidirectional characteristics of these two signal components. Our method uses the curvelet transform, which maps multidimensional data volumes into almost orthogonal localized multidimensional prototype waveforms that vary in directional and spatio-temporal content. Primaries-only and multiples-only signal components are recovered from the total data volume by a non-linear optimization scheme that is stable under noisy input data. During the optimization, the two signal components are separated by enhancing sparseness (through weighted l1-norms) in the transformed domain subject to fitting the observed data as the sum of the separated components to within a user-defined tolerance level. Whenever, during the optimization, the estimates for the primaries in the transformed domain correlate with the predictions for the multiples, the recovery of the coefficients for the estimated primaries will be suppressed while for regions where the correlation is small the method seeks the sparsest set of coefficients that represent the estimation for the primaries. Our algorithm does not seek a matched filter and as such it differs fundamentally from traditional adaptive subtraction methods. The method derives its stability from the sparseness obtained by a non-parametric (i.e. not depending on a parametrized physical model) multiscale and multidirectional overcomplete signal representation. This sparsity serves as prior information and allows for a Bayesian interpretation of our method during which the log-likelihood function is minimized while the two signal components are assumed to be given by a superposition of prototype waveforms, drawn independently from a probability function that is weighted by the predicted primaries and multiples. In this paper, the predictions are based on the data-driven surface-related multiple elimination method. Synthetic and field data examples show a clean separation leading to a considerable improvement in multiple suppression compared to the conventional method of adaptive matched filtering. This improved separation translates into an improved stack.},
	keywords = {Processing, signal separation, SLIM},
	doi = {10.1111/j.1365-246X.2007.03360.x},
	url = {https://slim.gatech.edu/Publications/Public/Journals/GeophysicalJournalInternational/2007/herrmann2007GJInlp/herrmann2007GJInlp.pdf},
	author = {Felix J. Herrmann and Urs Boeniger and D. J. Verschuur}
}
@conference {herrmann2006SINBADpms,
	title = {Primary-multiple separation by curvelet frames},
	booktitle = {SINBAD 2006},
	volume = {170},
	year = {2006},
	pages = {781-799},
	publisher = {Geophysical Journal International},
	organization = {Geophysical Journal International},
	abstract = {Predictive multiple suppression methods consist of two main steps: a prediction step, during which multiples are predicted from seismic data, and a primary-multiple separation step, during which the predicted multiples are {\textquoteright}matched{\textquoteright} with the true multiples in the data and subsequently removed. The last step is crucial in practice: an incorrect separation will cause residual multiple energy in the result or may lead to a distortion of the primaries, or both. To reduce these adverse effects, a new transformed-domain method is proposed where primaries and multiples are separated rather than matched. This separation is carried out on the basis of differences in the multiscale and multidirectional characteristics of these two signal components. Our method uses the curvelet transform, which maps multidimensional data volumes into almost orthogonal localized multidimensional prototype waveforms that vary in directional and spatio-temporal content. Primaries-only and multiples-only signal components are recovered from the total data volume by a nonlinear optimization scheme that is stable under noisy input data. During the optimization, the two signal components are separated by enhancing sparseness (through weighted l1-norms) in the transformed domain subject to fitting the observed data as the sum of the separated components to within a user-defined tolerance level. Whenever the prediction for the two signal components in the transformed domain correlate, the recovery is suppressed while for regions where the correlation is small the method seeks the sparsest set of coefficients that represent each signal component. Our algorithm does not seek a matched filter and as such it differs fundamentally from traditional adaptive subtraction methods. The method derives its stability from the sparseness obtained by a non-parametric multiscale and multidirectional overcomplete signal representation. This sparsity serves as prior information and allows for a Bayesian interpretation of our method during which the log-likelihood function is minimized while the two signal components are assumed to be given by a superposition of prototype waveforms, drawn independently from a probability function that is weighted by the predicted primaries and multiples. In this paper, the predictions are based on the data-driven surface-related multiple elimination (SRME) method. Synthetic and field data examples show a clean separation leading to a considerable improvement in multiple suppression compared to the conventional method of adaptive matched filtering. This improved separation translates into an improved stack.},
	keywords = {Presentation, SINBAD, SLIM},
	doi = {10.1111/j.1365-246X.2007.03360.x},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2006/herrmann2006SINBADpms/herrmann2006SINBADpms.pdf},
	author = {Felix J. Herrmann and Urs Boeniger and D. J. Verschuur}
}
@conference {herrmann2005EAGErcd1,
	title = {Robust curvelet-domain primary-multiple separation with sparseness constraints},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2005},
	month = {06},
	abstract = {A non-linear primary-multiple separation method using curvelets frames is presented. The advantage of this method is that curvelets arguably provide an optimal sparse representation for both primaries and multiples. As such curvelets frames are ideal candidates to separate primaries from multiples given inaccurate predictions for these two data components. The method derives its robustness regarding the presence of noise; errors in the prediction and missing data from the curvelet frame{\textquoteright}s ability (i) to represent both signal components with a limited number of multi-scale and directional basis functions; (ii) to separate the components on the basis of differences in location, orientation and scales and (iii) to minimize correlations between the coefficients of the two components. A brief sketch of the theory is provided as well as a number of examples on synthetic and real data.},
	keywords = {EAGE, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2005/Herrmann05EAGErcd1/Herrmann05EAGErcd1.pdf},
	url2 = {http://earthdoc.eage.org/publication/publicationdetails/?publication=1384},
	author = {Felix J. Herrmann and D. J. Verschuur}
}
@conference {herrmann2004CSEGcia1,
	title = {Curvelet imaging and processing: adaptive multiple elimination},
	booktitle = {CSEG Annual Conference Proceedings},
	year = {2004},
	month = {05},
	publisher = {CSEG},
	organization = {CSEG},
	abstract = {Predictive multiple suppression methods consist of two main steps: a prediction step, in which multiples are predicted from the seismic data, and a subtraction step, in which the predicted multiples are matched with the true multiples in the data. The last step appears crucial in practice: an incorrect adaptive subtraction method will cause multiples to be sub-optimally subtracted or primaries being distorted, or both. Therefore, we propose a new domain for separation of primaries and multiples via the Curvelet transform. This transform maps the data into almost orthogonal localized events with a directional and spatial-temporal component. The multiples are suppressed by thresholding the input data at those Curvelet components where the predicted multiples have large amplitudes. In this way the more traditional filtering of predicted multiples to fit the input data is avoided. An initial field data example shows a considerable improvement in multiple suppression.},
	keywords = {Presentation, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/CSEG/2004/Herrmann04CSEGcia1/Herrmann04CSEGcia1_paper.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/CSEG/2004/Herrmann04CSEGcia1/Herrmann04CSEGcia1.pdf},
	author = {Felix J. Herrmann and D. J. Verschuur}
}
@conference {herrmann2004SEGcdm,
	title = {Curvelet-domain multiple elimination with sparseness constraints},
	booktitle = {SEG Technical Program Expanded Abstracts},
	volume = {23},
	year = {2004},
	pages = {1333-1336},
	publisher = {SEG},
	organization = {SEG},
	abstract = {Predictive multiple suppression methods consist of two main steps: a prediction step, in which multiples are predicted from the seismic data, and a subtraction step, in which the predicted multiples are matched with the true multiples in the data. The last step appears crucial in practice: an incorrect adaptive subtraction method will cause multiples to be sub-optimally subtracted or primaries being distorted, or both. Therefore, we propose a new domain for separation of primaries and multiples via the Curvelet transform. This transform maps the data into almost orthogonal localized events with a directional and spatial-temporal component. The multiples are suppressed by thresholding the input data at those Curvelet components where the predicted multiples have large amplitudes. In this way the more traditional filtering of predicted multiples to fit the input data is avoided. An initial field data example shows a considerable improvement in multiple suppression. \copyright2004 Society of Exploration Geophysicists},
	keywords = {Presentation, SEG, SLIM},
	doi = {10.1190/1.1851110},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2004/Herrmann04SEGcdm/Herrmann04SEGcdm.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SEG/2004/Herrmann04SEGcdm/Herrmann04SEGcdm_pres.pdf},
	author = {Felix J. Herrmann and D. J. Verschuur}
}
@conference {herrmann2004EAGEsop,
	title = {Separation of primaries and multiples by non-linear estimation in the curvelet domain},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2004},
	month = {06},
	abstract = {Predictive multiple suppression methods consist of two main steps: a prediction step, in which multiples are predicted from the seismic data, and a subtraction step, in which the predicted multiples are matched with the true multiples in the data. The last step appears crucial in practice: an incorrect adaptive subtraction method will cause multiples to be sub-optimally subtracted or primaries being distorted, or both. Therefore, we propose a new domain for separation of primaries and multiples via the Curvelet transform. This transform maps the data into almost orthogonal localized events with a directional and spatial-temporal component. The multiples are suppressed by thresholding the input data at those Curvelet components where the predicted multiples have large amplitudes. In this way the more traditional filtering of predicted multiples to fit the input data is avoided. An initial field data example shows a considerable improvement in multiple suppression.},
	keywords = {SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2004/herrmann2004EAGEsop/herrmann2004EAGEsop.pdf},
	author = {Felix J. Herrmann and D. J. Verschuur}
}
