@presentation {herrmann2017SINBADFhrc,
	title = {Highly repeatable 3D compressive full-azimuth towed-streamer time-lapse acquisition {\textendash}- a numerical feasibility study at scale},
	year = {2017},
	publisher = {SINBAD},
	abstract = {Most conventional 3D time-lapse (or 4D) acquisitions are ocean-bottom cable (OBC) or ocean-bottom node (OBN) surveys since these surveys are relatively easy to replicate compared to towed-streamer surveys. To attain high degrees of repeatability, survey replicability and dense periodic sampling has become the norm for 4D surveys that renders this technology expensive. Conventional towed-streamer acquisitions suffer from limited illumination of subsurface due to narrow azimuth. Although, acquisition techniques such as multi-azimuth, wide-azimuth, rich-azimuth acquisition, etc., have been developed to illuminate the subsurface from all possible angles, these techniques can be prohibitively expensive for densely sampled surveys. This leads to uneven sampling, i.e., dense receiver and coarse source sampling or vice-versa, in order to make these acquisitions more affordable. Motivated by the design principles of Compressive Sensing (CS), we acquire economic, randomly subsampled (or compressive) and simultaneous towed-streamer time-lapse data without the need of replicating the surveys. We recover densely sampled time-lapse data on one and the same periodic grid by using a joint-recovery model (JRM) that exploits shared information among different time-lapse recordings, coupled with a computationally cheap and scalable rank-minimization technique. The acquisition is low cost since we have subsampled measurements (about 70\% subsampled), simulated with a simultaneous long-offset acquisition configuration of two source vessels travelling across a survey area at random azimuths. We analyze the performance of our proposed compressive acquisition and subsequent recovery strategy by conducting a synthetic, at scale, seismic experiment on a 3D time-lapse model containing geological features such as channel systems, dipping and faulted beds, unconformities and a gas cloud. Our findings indicate that the insistence on replicability between surveys and the need for OBC/OBN 4D surveys can, perhaps, be relaxed. Moreover, this is a natural next step beyond the successful CS acquisition examples discussed during this session.},
	keywords = {Presentation, SINBAD, SINBADFALL2017, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2017/Fall/herrmann2017SINBADFhrc/herrmann2017SINBADFhrc.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2017/Fall/herrmann2017SINBADFhrc/herrmann2017SINBADFhrc.mov},
	author = {Felix J. Herrmann and Rajiv Kumar and Haneet Wason and Shashin Sharan and Felix Oghenekohwo}
}
@presentation {siahkoohi2017SINBADFsdi,
	title = {Seismic data interpolation with Generative Adversarial Networks},
	year = {2017},
	publisher = {SINBAD},
	abstract = {In this project we implement an algorithm to predict the missing traces in the seismic shot gathers. The missing traces can be either regular or irregular. Any interpolation scheme assumes a prior knowledge on the data. Here the prior information used to interpolate the data is obtained from interaction of two trained deep neural networks, namely Generator and Discriminator. The combination of these two neural networks is called Generative Adversarial Network (GAN). GAN is trained on finely sampled seismic shot gathers. By employing the trained GAN we can project shot gathers with missing traces into the domain of the generator network. Then by computing the output of generator given the found projection, we can fill in the initial gather.},
	keywords = {Presentation, SINBAD, SINBADFALL2017, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2017/Fall/siahkoohi2017SINBADFsdi/siahkoohi2017SINBADFsdi.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2017/Fall/siahkoohi2017SINBADFsdi/siahkoohi2017SINBADFsdi.mov},
	author = {Ali Siahkoohi and Felix J. Herrmann}
}
@presentation {sharan2017SINBADFtts,
	title = {Tracking the spatial-temporal evolution of fractures by microseismic source collocation},
	year = {2017},
	publisher = {SINBAD},
	abstract = {Unlike conventional reservoirs, unconventional plays are not naturally viable for economical production of oil and gas. They require stimulation by injecting high-pressure fluid causing fractures in the rocks. These fractures make the medium more permeable, hence, the extraction of oil and gas becomes feasible. For drilling purposes and to prevent potentially hazardous situations, we need to have good knowledge of the location of these fractures. Also, we need to have good knowledge about how these fractures originated in time. Hydraulic fracturing changes stress in rocks, which results in the emission of microseismic waves. The opening of cracks due to high pressure fluid injection during hydraulic fracturing mainly causes this change in stress in the rocks. Therefore, microseismic events are mostly localized along these fractures and have finite energy along time. To accurately track the evolution of fractures in both space and time, we need to locate closely spaced microseismic events along these fractures activating at very small time intervals. A naive approach can be the back propagation of the observed data to find out a point in space and time where maximum focusing of back propagating energy occurs. This point corresponds to the location and origin time of a microseismic source. This approach, although simpler, suffers from low resolution and requires scanning of complete 4D volume (3D in space and 1D in time). Hence, this method can be challenging when there are multiple closely spaced microseismic sources originating at different times. We in this work propose a sparsity promotion based method that can locate closely spaced microseismic events, with spatial separation as low as within half a wavelength, activating at small time intervals. We simultaneously estimate the origin time of microseismic events by estimating their source time functions. Our method exploits the fact that microseismic events are localized in space and have finite energy. We use accelerated Linearized Bregman algorithm with a preconditioning operator to arrive at a computationally feasible scheme.},
	keywords = {Presentation, SINBAD, SINBADFALL2017, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2017/Fall/sharan2017SINBADFtts/sharan2017SINBADFtts.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2017/Fall/sharan2017SINBADFtts/sharan2017SINBADFtts.mov},
	author = {Shashin Sharan and Rongrong Wang and Felix J. Herrmann}
}
@presentation {kumar2016SINBADFels,
	title = {Efficient large-scale 5D seismic data acquisition and processing using rank-minimization},
	year = {2016},
	publisher = {SINBAD},
	abstract = {Seismic data collection is becoming challenging because of increased demands for high-quality, long-offset and wide-azimuth data. Leveraging ideas from CS, in this work we establish a cost effective acquisition and processing techniques, which are no longer dominated by survey area size but by the sparsity of seismic data volumes. In the first part of abstract, we establish connections between random time dithering and jittered sampling in space. Specifically, we recover high-quality 5D seismic data volumes from time-jittered marine acquisition where the average inter-shot time is significantly reduced, leading to cheaper surveys due to fewer overlapping shots. The time-jittered acquisition, in conjunction with the shot separation by Singular-Value Decomposition (SVD)-free factorization based rank-minimization approach, allows us to recover high quality 5D seismic data volumes. Results are illustrated for simulations of simultaneous time-jittered continuous recording for a 3D ocean-bottom cable survey, where we outperforms existing techniques, by an order of magnitude computational speedup and using 1/20th of the memory, that use sparsity in transforms domains. The second part of abstract focussed on leveraging low-rank structure in seismic data to solve extremely large data recovery (interpolation) problems. We introduced a large{\textendash}scale SVD-free optimization framework that is robust with respect to outliers and that uses information on the support. We test the efficacy of the proposed interpolation framework on a large-scale 5D seismic data, generated from the geologically complex synthetic 3D Compass velocity model, where 80\% of the data has been removed. Our findings show that major computational and memory gains are possible compared to curvelet-based reconstruction.},
	keywords = {Presentation, SINBAD, SINBADFALL2016, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/kumar2016SINBADFels/kumar2016SINBADFels.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/kumar2016SINBADFels/kumar2016SINBADFels.mov},
	author = {Rajiv Kumar and Shashin Sharan and Haneet Wason and Felix J. Herrmann}
}
@presentation {sharan2016SINBADFhrm,
	title = {High resolution microseismic source collocation},
	year = {2016},
	publisher = {SINBAD},
	abstract = {Microseismic waves generated by hydraulic fracturing are used to locate the fractures created in the reservoir. Most of the existing source collocation methods have their limitations in terms of resolution of very closely spaced microseismic events. In this work we propose a method to collocate microseismic events with high resolution along with simultaneous estimation of source time function. In the context of waves, the finite-difference modelling operator acts as an analysis operator for wavefields. This implies that wavefields under the action of a finite-difference modelling kernel can be focused to sources generating these wavefields. We exploit this property of wavefields to locate microseismic events and estimate the source time function jointly. To arrive at a computational feasible scheme, we use the accelerated version of Linearized Bregman (LBR) algorithm to solve the above mentioned problem. This is joint work with Rongrong Wang.},
	keywords = {Presentation, SINBAD, SINBADFALL2016, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/sharan2016SINBADFhrm/sharan2016SINBADFhrm.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/sharan2016SINBADFhrm/sharan2016SINBADFhrm.mov},
	author = {Shashin Sharan and Rongrong Wang and Felix J. Herrmann}
}
@presentation {wason2016SINBADFlcr,
	title = {Low-cost, randomized 3D towed-marine time-lapse seismic acquisition},
	year = {2016},
	publisher = {SINBAD},
	abstract = {Most often conventional 3D towed-marine seismic data acquisition suffers from limited illumination of subsurface due to narrow azimuth. Although, acquisition techniques such as Ocean Bottom Cable (OBC), Ocean Bottom Node (OBN), Rich-Azimuth (RAZ) acquisition, Multi-Azimuth (MAZ) acquisition have been developed to illuminate the subsurface from all possible angles, these acquisition techniques are expensive. Motivated by the design principles of compressed sensing, we acquire randomly subsampled and simultaneous (e.g., simultaneous long offset) 3D towed-marine time-lapse seismic data for few (random) azimuths, and recover densely sampled multiple azimuth baseline and monitor data via sparsity promotion and rank minimization. Our acquisition is low cost since we have subsampled measurements.},
	keywords = {Presentation, SINBAD, SINBADFALL2016, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/wason2016SINBADFlcr/wason2016SINBADFlcr.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/wason2016SINBADFlcr/marine_acq_mask.pdf},
	author = {Rajiv Kumar and Felix Oghenekohwo and Shashin Sharan and Haneet Wason and Felix J. Herrmann}
}
@presentation {witte2016SINBADFpve,
	title = {Phase velocity error minimizing scheme for the anisotropic pure P-wave equation},
	year = {2016},
	publisher = {SINBAD},
	abstract = {Pure P-wave equations for acoustic modeling in transverse isotropic media are derived by approximating the exact pure P-wave dispersion relation. In this work, we present an alternative to the common Taylor expansion based equations, in which we approximate the exact dispersion relation through a polynomial expansion and determine its coefficients by solving a least squares problem that minimizes the phase velocity error over the complete range of phase angles. We show that this approach is up to an order of magnitude more accurate than other pure P-wave equations at a comparable computational cost.},
	keywords = {Presentation, SINBAD, SINBADFALL2016, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/witte2016SINBADFpve/witte2016SINBADFpve.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2016/Fall/witte2016SINBADFpve/witte2016SINBADFpve.mov},
	author = {Philipp A. Witte and Christiaan C. Stolk and Felix J. Herrmann}
}
@presentation {peters2015SINBADrwi,
	title = {Regularizing waveform inversion by projections onto convex sets},
	year = {2015},
	publisher = {SINBAD},
	abstract = {A framework is proposed for regularizing the waveform inversion problem by projections onto intersections of convex sets. Multiple pieces of prior information about the geology are represented by multiple convex sets, for example limits on the velocity or minimum smoothness conditions on the model. The data-misfit is then minimized, such that the estimated model is always in the intersection of the convex sets. Therefore, it is clear what properties the estimated model will have at each iteration. This approach does not require any quadratic penalties to be used and thus avoids the known problems and limitations of those types of penalties. It is shown that by formulating waveform inversion as a constrained problem, regularization ideas such as Tikhonov regularization and gradient filtering can be incorporated into one framework. The algorithm is generally applicable, in the sense that it works with any (differentiable) objective function and does not require significant additional computation. The method is demonstrated on the inversion of the 2D marine isotropic elastic synthetic seismic benchmark by Chevron using an acoustic modeling code. To highlight the effect of the projections, we apply no data pre-processing.},
	keywords = {Presentation, SINBAD, SINBADSPRING2015, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Spring/peters2015SINBADrwi/peters2015SINBADrwi.pdf},
	author = {Bas Peters and Brendan R. Smithyman and Felix J. Herrmann}
}
@presentation {peters2015SINBADFrwi,
	title = {Regularizing waveform inversion by projections onto intersections of convex sets},
	year = {2015},
	publisher = {SINBAD},
	abstract = {Common strategies to regularize waveform inversion (and other geophysical inverse problems) are adding quadratic penalty terms to the objective function or filtering the gradients used to update the model estimate. An example are penalties or filters to prevent/filter spurious high spatial frequency oscillations in the model while working with low frequency data. We present an alternative way of regularization, which works by projecting the model onto an intersection of convex sets, where each sets encodes certain desired model properties. This approach has certain theoretical and practical advantages over quadratic penalties or gradient filters. Some examples of useful convex sets in various challenging waveform inversion settings are shown on both real and synthetic data.},
	keywords = {Presentation, SINBAD, SINBADFALL2015, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/peters2015SINBADFrwi/peters2015SINBADFrwi.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/peters2015SINBADFrwi/peters2015SINBADFrwi.mov},
	author = {Bas Peters and Brendan R. Smithyman and Mathias Louboutin and Felix J. Herrmann}
}
@presentation {dasilva2015SINBADFsss,
	title = {Scaling SINBAD software to 3-D on Yemoja},
	year = {2015},
	publisher = {SINBAD},
	abstract = {We present early results on the scalability of SINBAD{\textquoteright}s wavefield reconstruction and wave-equation based inversion technologies on Yemoja, a 17k core cluster made available to us by BG Group at SENAI CIMATEC Supercomputing Centre in Brazil.},
	keywords = {Presentation, SINBAD, SINBADFALL2015, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/dasilva2015SINBADFsss/dasilva2015SINBADFsss.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/dasilva2015SINBADFsss/dasilva2015SINBADFsss.mov},
	author = {Curt Da Silva and Haneet Wason and Mathias Louboutin and Bas Peters and Shashin Sharan and Zhilong Fang and Felix J. Herrmann}
}
@presentation {sharan2015SINBADFscu,
	title = {Source collocation using the method of Linearized Bregman},
	year = {2015},
	publisher = {SINBAD},
	abstract = {In this work, we present a method to collocate sources from seismic reflections recorded at receiver locations. We use the method of linearized Bregman. This algorithm focuses unknown sources by promoting sparsity in the {\textquotedblleft}Helmholtz domain{\textquotedblright}{\textemdash}i.e., the wavefield under the action of the the Helmholtz system{\textemdash}under the constraint of a data misfit within a particular tolerance. We extend this method to noisy measurements. We are in particular interested in situations where the noise is coherent because it is in the range of the Helmholtz equation.},
	keywords = {Presentation, SINBAD, SINBADFALL2015, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/sharan2015SINBADFscu/sharan2015SINBADFscu.pdf},
	url2 = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2015/Fall/sharan2015SINBADFscu/sharan2015SINBADFscu.mov},
	author = {Shashin Sharan and Rongrong Wang and Felix J. Herrmann}
}
@presentation {peters2014SINBADcda,
	title = {Challenges and developments arising from 2D FWI of a land VSP dataset in the Permian Basin},
	year = {2014},
	publisher = {SINBAD},
	abstract = {Full-waveform inversion was carried out to map 3D velocity structures for a site in the Permian Basin of Texas, USA. The data come from co-located surface and 3D VSP seismic surveys that share common source vibration points. This challenging on-land setting has been used as a testbed to evaluate our FWI algorithms and their effectiveness when applied to real-data problems. We discuss the challenges posed by this case study, and several new techniques and methodological refinements that have been developed and tested as a result. These include: regularization and incorporation of multiple datasets in an on-land FWI workflow; restrictions on the types of models allowed (viz., smoothness regularization) by quadratic penalty and by Projected Quasi-Newton (PQN) inversion; corrections to enable 2D FWI and recovery of 3D models; the state of ongoing work in WRI ({\textquoteleft}{\textquoteleft}Penalty Method{\textquoteright}{\textquoteright} inversion) and the handling of anisotropy.},
	keywords = {Presentation, SINBAD, SINBADFALL2014, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2014/Fall/peters2014SINBADcda/peters2014SINBADcda.pdf},
	author = {Brendan R. Smithyman and Bas Peters and Felix J. Herrmann}
}
@presentation {li2013SINBADgom,
	title = {Lessons learned from Chevron Gulf of Mexico data set},
	year = {2013},
	publisher = {SINBAD},
	abstract = {Chevron Gulf of Mexico data set is very challenging for FWI because of elastic phases, limited offset, lack of low frequencies and salt structure. To overcome these issue, we first use ray-based tomography on the hand-picked first breaks to generate initial model for FWI, and then we apply curvelet-denosing techniques to improve the poor signal-to-noise ratio of the observed data at low frequencies. Finally, Curvelet domain sparsity promoting Gauss-Newton FWI helps to suppress model space artifacts caused by elastic phases. This is joint work with Andrew J. Calvert, Ian Hanlon, Mostafa Javanmehri, Rajiv Kumar, Tristan van Leeuwen, Brendan R. Smithyman, Haneet Wason and Felix J. Herrmann},
	keywords = {Presentation, SINBAD, SINBADFALL2013, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2013/Fall/li2013SINBADgom/li2013SINBADgom.pdf},
	author = {Xiang Li and Andrew J. Calvert and Ian Hanlon and Mostafa Javanmehri and Rajiv Kumar and Tristan van Leeuwen and Brendan R. Smithyman and Haneet Wason and Felix J. Herrmann}
}
@presentation {smithyman2013SINBADprb,
	title = {Phase-residual based quality-control methods and techniques for mitigating cycle skips},
	year = {2013},
	publisher = {SINBAD},
	abstract = {Most full-waveform inversion algorithms use local optimization methods to iteratively improve the numerical earth model. All of these make the implicit assumption that the the model close to the true earth to avoid cycle. In practice this may not be true. We explore two questions: 1. How do we understand and visualize the cycle skip phenomenon in order to recognize it if it exists? 2. How do we automate this quality control step and use the rich information from multiple data to mitigate cycle skips and avoid local minima?},
	keywords = {Presentation, SINBAD, SINBADFALL2013, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2013/Fall/smithyman2013SINBADprb/smithyman2013SINBADprb.pdf},
	author = {Brendan R. Smithyman and Felix J. Herrmann}
}
@presentation {herrmann2012SINBADfwi,
	title = {Our findings on the Chevron benchmark dataset},
	year = {2012},
	publisher = {SINBAD},
	abstract = {During this presentation, we will review our findings working with the synthetic GOM data released as part of the post SEG workshop:"Gulf of Mexico Imaging Challenges: What Can Full Waveform Inversion Achieve?". This is joint work with Andrew J. Calvert, Ian Hanlon, Mostafa Javanmehri, Rajiv Kumar, Tristan van Leeuwen, Xiang Li, Brendan R. Smithyman, Eric Takam Takougang, and Haneet Wason.},
	keywords = {Presentation, SINBAD, SINBADFALL2012, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2012/Fall/herrmann2012SINBADfwi/herrmann2012SINBADfwi_pres.pdf},
	author = {Andrew J. Calvert and Ian Hanlon and Mostafa Javanmehri and Rajiv Kumar and Tristan van Leeuwen and Xiang Li and Brendan R. Smithyman and Eric Takam Takougang and Haneet Wason and Felix J. Herrmann}
}
@presentation {saab2010SINBADcsk,
	title = {Compressed sensing using Kronecker products},
	year = {2010},
	publisher = {SINBAD},
	keywords = {Presentation, SINBAD, SINBADFALL2010, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2010/Fall/saab2010SINBADcsk/saab2010SINBADcsk_pres.pdf},
	author = {Rayan Saab}
}
@presentation {schmidt2010SINBADhsd,
	title = {Hybrid stochastic-deterministic methods},
	year = {2010},
	publisher = {SINBAD},
	keywords = {Presentation, SINBAD, SINBADFALL2010, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2010/Fall/schmidt2010SINBADhsd/schmidt2010SINBADhsd_pres.pdf},
	author = {Mark Schmidt}
}
@conference {saab2008SINBADcps,
	title = {Curvelet-based primary-multiple separation from a Bayesian perspective},
	booktitle = {SINBAD 2008},
	year = {2008},
	abstract = {We present a novel primary-multiple separation scheme which makes use of the sparsity of both primaries and multiples in a transform domain, such as the curvelet transform, to provide estimates of each. The proposed algorithm utilizes seismic data as well as the output of a preliminary step that provides (possibly) erroneous predictions of the multiples. The algorithm separates the signal components, i.e., the primaries and multiples, by solving an optimization problem that assumes noisy input data and can be derived from a Bayesian perspective. More precisely, the optimization problem can be arrived at via an assumption of a weighted Laplacian distribution for the primary and multiple coefficients in the transform domain and of white Gaussian noise contaminating both the seismic data and the preliminary prediction of the multiples, which both serve as input to the algorithm.},
	keywords = {Presentation, SINBAD, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2008/saab2008SINBADcps/saab2008SINBADcp.pdf},
	author = {Rayan Saab}
}
@conference {wang2008SINBADrri,
	title = {Recent results in curvelet-based primary-multiple separation},
	booktitle = {SINBAD 2008},
	year = {2008},
	abstract = {We present a nonlinear curvelet-based sparsity-promoting formulation for the primary-multiple separation problem. We show that these coherent signal components can be separated robustly by explicitly exploiting the locality of curvelets in phase space (space-spatial frequency plane) and their ability to compress data volumes that contain wavefronts. This work is an extension of earlier results and the presented algorithms are shown to be stable under noise and moderately erroneous multiple predictions.},
	keywords = {Presentation, SINBAD, SLIM},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2008/wang2008SINBADrri/wang2008SINBADrri.pdf},
	author = {Deli Wang and Rayan Saab and Ozgur Yilmaz and Felix J. Herrmann}
}
@conference {sastry2007SINBADnor,
	title = {Norm-one recovery from irregular sampled data},
	booktitle = {SINBAD 2007},
	year = {2007},
	abstract = {Seismic traces are sampled irregularly and insufficiently due to practical and economical limitations. The use of such data in seismic imaging results in image artifacts and poor spatial resolution. Therefore, before being used, the measurements are to be interpolated onto a regular grid. One of the methods achieving this objective is based on the Fourier reconstruction, which deals with the under-determined system of equations. The recent pursuit techniques (namely, basis pursuit, matching pursuit etc) admit certain promising features such as faster and simpler implementation even in large scale settings. The presentation discusses the application of the pursuit algorithms to the Fourier-based interpolation problem for the signals that have sparse Fourier spectra. In particular, the objective of the presentation includes: 1). studying the performance of the algorithm if, and how far, the measurement coordinates can be shifted from uniform distribution on the continuous interval. 2). studying what could be the allowable misplacement in the measurement coordinates that does not alter the quality of the reconstruction process},
	keywords = {Presentation, SINBAD, SLIM},
	author = {Challa S. Sastry}
}
@conference {sastry2007SINBADrfu,
	title = {Recovery from unstructured data},
	booktitle = {SINBAD 2006},
	year = {2006},
	keywords = {Presentation, SINBAD, SLIM},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/SINBAD/2006/sastry2007SINBADrfu/sastry2007SINBADrfu.pdf},
	author = {Challa S. Sastry and Gilles Hennenfent and Felix J. Herrmann}
}
