@conference {alfaraj2018EAGEasa,
	title = {Automatic statics and residual statics correction with low-rank approximation},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2018},
	note = {(EAGE, Copenhagen)},
	month = {06},
	abstract = {Seismic data, mainly on land, suffers from long-wavelength statics due to the laterally varying and heterogeneous nature of the near-surface weathering layers. We propose an automatic, data-driven and computationally efficient statics correction method based on low-rank approximation to correct for such statics. The method does not require a model to estimate static time shifts, which is the case for other static correction methods; rather it applies the appropriate static corrections on the data such that it becomes low rank in a certain domain. As of now, the method is applicable to data that has been corrected for elevation statics. Due to the near-surface irregularities and due to approximations used by static correction methods that lead to not fully correcting for statics, an iterative residual statics correction becomes necessary. Our proposed method corrects for residual statics without the necessity of the surface consistency assumption and a multi-iterate process. Additional benefits of the method include artifacts and noise suppression. We demonstrate the successful application of our method on several synthetic data examples.},
	keywords = {EAGE, land, Rank, residual statics, statics},
	doi = {10.3997/2214-4609.201801107},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2018/alfaraj2018EAGEasa/alfaraj2018EAGEasa.html},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2018/alfaraj2018EAGEasa/alfaraj2018EAGEasa_pres.pdf},
	author = {Ali M. Alfaraj and Rajiv Kumar and Felix J. Herrmann}
}
@conference {alfaraj2017EAGEswr,
	title = {Shear wave reconstruction from low cost randomized acquisition},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2017},
	note = {(EAGE, Paris)},
	month = {06},
	abstract = {Shear waves travel in the subsurface at a lower speed compared with compressional waves. Therefore, much finer spatial sampling is required to properly record the shear waves. This leads to higher acquisition costs which are typically avoided by designing surveys geared towards only compressional waves imaging. We propose using randomly under-sampled ocean bottom acquisition for recording both compressional and shear waves. The recorded multicomponent data is then interpolated using an SVD-free low rank interpolation scheme that is feasible for large scale seismic data volumes to obtain finely sampled data. Following that, we perform elastic wavefield decomposition at the ocean bottom to recover accurate up- and dow-going S-waves. Synthetic data results indicate that using randomized under-sampled acquisition, we can recover accurate S-waves with an economical cost compared with conventional acquisition designs.},
	keywords = {EAGE, interpolation, randomized acquisition, rank minimization, shear waves},
	doi = {10.3997/2214-4609.201700594},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2017/alfaraj2017EAGEswr/alfaraj2017EAGEswr.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2017/alfaraj2017EAGEswr/alfaraj2017EAGEswr_pres.pdf},
	author = {Ali M. Alfaraj and Rajiv Kumar and Felix J. Herrmann}
}
@conference {kumar2014EAGErank,
	title = {SVD-free low-rank matrix factorization : wavefield reconstruction via jittered subsampling and reciprocity},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2014},
	month = {06},
	abstract = {Recently computationally efficient rank optimization techniques have been studied extensively to develop a new mathematical tool for the seismic data interpolation. So far, matrix completion problems have been discussed where sources are subsample according to a discrete uniform distribution. In this paper, we studied the effect of two different subsampling techniques on seismic data interpolation using rank-regularized formulations, namely jittered subsampling over uniform random subsampling. The other objective of this paper is to combine the fact of source-receiver reciprocity with the rank-minimization techniques to enhance the accuracy of missing-trace interpolation. We illustrate the advantages of jittered subsampling and reciprocity using a seismic line from Gulf of Suez to obtain high quality results for interpolation, a key application in exploration geophysics.},
	keywords = {EAGE, interpolation, low-rank, reciprocity},
	doi = {10.3997/2214-4609.20141394},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2014/kumar2014EAGErank/kumar2014EAGErank.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2014/kumar2014EAGErank/kumar2014EAGErank_pres.pdf},
	author = {Rajiv Kumar and Aleksandr Y. Aravkin and Ernie Esser and Hassan Mansour and Felix J. Herrmann}
}
@conference {tu2013EAGElsm,
	title = {Fast least-squares migration with multiples and source estimation},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2013},
	month = {06},
	abstract = {The advent of modern computing has made it possible to do seismic imaging using least-squares reverse-time migration. We obtain superior images by solving an optimization problem that recovers the true-amplitude images. However, its success hinges on overcoming several issues, including overwhelming problem size, unknown source wavelet, and interfering coherent events like multiples. In this abstract, we reduce the problem size by using ideas from compressive sensing, and estimate source wavelet by generalized variable projection. We also demonstrate how to invert for subsurface information encoded in surface-related multiples by incorporating the free-surface operator as an areal source in reverse-time migration. Our synthetic examples show that multiples help to improve the resolution of the image, as well as remove the amplitude ambiguity in wavelet estimation.},
	keywords = {EAGE, Imaging, multiples, source estimation, sparse},
	doi = {10.3997/2214-4609.20130727},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/tu2013EAGElsm/tu2013EAGElsm.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/tu2013EAGElsm/tu2013EAGElsm_pres.pdf},
	author = {Ning Tu and Aleksandr Y. Aravkin and Tristan van Leeuwen and Felix J. Herrmann}
}
@conference {vanleeuwen2013EAGErobustFWI,
	title = {In which domain should we measure the misfit for robust full waveform inversion?},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2013},
	month = {06},
	abstract = {Full-waveform inversion relies on minimizing the difference between observed and modeled data, as measured by some penalty function. A popular choice, of course, is the least-squares penalty. However, when outliers are present in the data, the use of robust penalties such as the Huber or Student{\textquoteright}s t may significantly improve the results since they put relatively less weight on large residuals. In order for robust penalties to be effective, the outliers must be somehow localized and distinguishable from the good data. We propose to first transform the residual into a domain where the outliers are localized before measuring the misfit with a robust penalty. This is exactly how one would normally devise filters to remove the noise before applying conventional FWI. We propose to merge the two steps and let the inversion process implicitly filter out the noise. Results on a synthetic dataset show the effectiveness of the approach.},
	keywords = {EAGE, full waveform inversion},
	doi = {10.3997/2214-4609.20130839},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/vanleeuwen2013EAGErobustFWI/vanleeuwen2013EAGErobustFWI.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/vanleeuwen2013EAGErobustFWI/vanleeuwen2013EAGErobustFWI_pres.pdf},
	author = {Tristan van Leeuwen and Aleksandr Y. Aravkin and Henri Calandra and Felix J. Herrmann}
}
@conference {kumar2013EAGEsind,
	title = {Seismic data interpolation and denoising using SVD-free low-rank matrix factorization},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2013},
	month = {06},
	abstract = {Recent developments in rank optimization have allowed new approaches for seismic data interpolation and denoising. In this paper, we propose an approach for simultaneous seismic data interpolation and denoising using robust rank-regularized formulations. The proposed approach is suitable for large scale problems, since it avoids SVD computations by using factorized formulations. We illustrate the advantages of the new approach using a seismic line from Gulf of Suez and 5D synthetic seismic data to obtain high quality results for interpolation and denoising, a key application in exploration geophysics.},
	keywords = {denoising, EAGE, interpolation},
	doi = {10.3997/2214-4609.20130388},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/kumar2013EAGEsind/kumar2013EAGEsind.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2013/kumar2013EAGEsind/kumar2013EAGEsind_pres.pdf},
	author = {Rajiv Kumar and Aleksandr Y. Aravkin and Hassan Mansour and Ben Recht and Felix J. Herrmann}
}
@conference {aravkin2012EAGErobust,
	title = {Source estimation for frequency-domain FWI with robust penalties},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2012},
	month = {06},
	abstract = {Source estimation is an essential component of full waveform inversion. In the standard frequency domain formulation, there is closed form solution for the the optimal source weights, which can thus be cheaply estimated on the fly. A growing body of work underscores the importance of robust modeling for data with large outliers or artifacts that are not captured by the forward model. Effectively, the least-squares penalty on the residual is replaced by a robust penalty, such as Huber, Hybrid {\textquoteleft}1-{\textquoteleft}2 or Student{\textquoteright}s t. As we will demonstrate, it is essential to use the same robust penalty for source estimation. In this abstract, we present a general approach to robust waveform inversion with robust source estimation. In this general formulation, there is no closed form solution for the optimal source weights so we need to solve a scalar optimization problem to obtain these weights. We can efficiently solve this optimization problem with a Newton-like method in a few iterations. The computational cost involved is of the same order as the usual least-squares source estimation procedure. We show numerical examples illustrating robust source estimation and robust waveform inversion on synthetic data with outliers.},
	keywords = {EAGE},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2012/aravkin2012EAGErobust/aravkin2012EAGErobust.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2012/aravkin2012EAGErobust/aravkin2012EAGErobust_pres.pdf},
	url2 = {http://earthdoc.eage.org/publication/publicationdetails/?publication=59196},
	author = {Aleksandr Y. Aravkin and Tristan van Leeuwen and Henri Calandra and Felix J. Herrmann}
}
@conference {li2011EAGEfwirr,
	title = {Full-waveform inversion with randomized L1 recovery for the model updates},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2011},
	month = {05},
	abstract = {Full-waveform inversion (FWI) is a data fitting procedure that relies on the collection of seismic data volumes and sophisticated computing to create high-resolution results. With the advent of FWI, the improvements in acquisition and inversion have been substantial, but these improvements come at a high cost because FWI involves extremely large multi-experiment data volumes. The main obstacle is the "curse of dimensionality" exemplified by Nyquist{\~O}s sampling criterion, which puts a disproportionate strain on current acquisition and processing systems as the size and desired resolution increases. In this paper, we address the "curse of dimensionality" by randomized dimensionality reduction of the FWI problem adapted from the field of CS. We invert for model updates by replacing the Gauss-Newton linearized subproblem for subsampled FWI with a sparsity promoting formulation, and solve this formulation using the SPGl1 algorithm. We speed up the algorithm and avoid overfitting the data by solving for the linearized updates only approximately. Our approach is successful because it reduces the size of seismic data volumes without loss of information. With this reduction, we can compute a Newton-like update with the reduced data volume at the cost of roughly one gradient update for the fully sampled wavefield.},
	keywords = {EAGE, Full-waveform inversion, Presentation},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2011/li11EAGEfwirr/li11EAGEfwirr.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2011/li11EAGEfwirr/li11EAGEfwirr_pres.pdf},
	url2 = {http://earthdoc.eage.org/publication/publicationdetails/?publication=50345},
	author = {Xiang Li and Aleksandr Y. Aravkin and Tristan van Leeuwen and Felix J. Herrmann}
}
@conference {aravkin2011EAGEnspf,
	title = {A nonlinear sparsity promoting formulation and algorithm for full waveform inversion},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2011},
	month = {05},
	abstract = {Full Waveform Inversion (FWI) is a computational procedure to extract medium parameters from seismic data. FWI is typically formulated as a nonlinear least squares optimization problem, and various regularization techniques are used to guide the optimization because the problem is illposed. In this paper, we propose a novel sparse regularization which exploits the ability of curvelets to efficiently represent geophysical images. We then formulate a corresponding sparsity promoting constrained optimization problem, which we call Nonlinear Basis Pursuit Denoise (NBPDN) and present an algorithm to solve this problem to recover medium parameters. The utility of the NBPDN formulation and efficacy of the algorithm are demonstrated on a stylized cross-well experiment, where a sparse velocity perturbation is recovered with higher quality than the standard FWI formulation (solved with LBFGS). The NBPDN formulation and algorithm can recover the sparse perturbation even when the data volume is compressed to 5 \% of the original size using random superposition.},
	keywords = {EAGE, Full-waveform inversion, Optimization},
	url = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2011/aravkin11EAGEnspf/aravkin11EAGEnspf.pdf},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2011/aravkin11EAGEnspf/aravkin11EAGEnspf_pres.pdf},
	url2 = {http://earthdoc.eage.org/publication/publicationdetails/?publication=50199},
	author = {Aleksandr Y. Aravkin and James V. Burke and Felix J. Herrmann and Tristan van Leeuwen}
}
@conference {aravkin2011EAGEspfwi,
	title = {Sparsity promoting formulations and algorithms for FWI},
	booktitle = {EAGE Annual Conference Proceedings},
	year = {2011},
	keywords = {EAGE, Full-waveform inversion},
	presentation = {https://slim.gatech.edu/Publications/Public/Conferences/EAGE/2011/Aravkin2011EAGEspfwi/Aravkin2011EAGEspfwi.pdf},
	author = {Aleksandr Y. Aravkin and Tristan van Leeuwen and James V. Burke and Felix J. Herrmann}
}
